Ceredigion · Wales

Bath Repair in Rhosygadair Newydd

We travel to Rhosygadair Newydd for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • A failed DIY repair that is discoloured or lifting
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Rhosygadair Newydd homes

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

How we handle bath repair in Rhosygadair Newydd

You don’t need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. We’re frequently asked to fix a chipped rim or side and an old repair that has yellowed or come loose, on acrylic, cast iron enamel and pressed steel enamel.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
Rhosygadair Newydd (SA43)
Area hub
Ceredigion
Guarantee
A year, on every repair
Quote
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Aftercare tips

Most damage we see is avoidable. A few tips:

  • Store metal items away from the bath
  • Get a dripping tap fixed promptly
  • Keep abrasive pads and gritty cleaners away from the bath
  • Rinse the bath after use, especially in hard water areas

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Do you need bath repair in Rhosygadair Newydd?

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.

Keep an eye out for these signs:

  • Chips along the edge of the bath
  • Damage done while the bathroom was being fitted
  • Chips under the taps
  • Cracks in an acrylic bath

Before booking anyone

  • Whether the price is fixed and includes VAT
  • The length of the guarantee and what it covers
  • How the colour is matched
  • What preparation is included

Our hiring checklist

When we would advise against a repair

We won’t take on work that will not last, so here’s what a repair can’t put right:

  • Rust that has eaten right through a steel bath
  • Flexing caused by a failed cradle or loose feet
  • Acrylic cracks with no access behind them

Not sure? Send photos and we’ll give you a straight answer before booking.

Surfaces we repair

  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic

What affects the price in Rhosygadair Newydd

Repairs from £95. You won’t pay by the hour. The price depends on:

  • Where the damage is and how we get to it
  • How many areas need work
  • Whether we combine several jobs
  • The material and finish

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what we need:

  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus
  • The material, if you know it
  • A picture taken from further back

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Rhosygadair Newydd and the surrounding area

Rhosygadair Newydd is about 21 miles north-west of Carmarthen, in Ceredigion. Jobs in Rhosygadair Newydd are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We work in 125 places across Ceredigion.

Every address in SA43 is covered, from the main roads to the quietest streets. We also travel to Blaenannerch (1 mile south), Parcllyn (1 mile north), Aberporth (1 mile north-east), Blaenporth (1 mile south-east) and Penparc (3 miles south-west). Larger places within reach include Aberteifi (5 miles south-west), Aberaeron (15 miles north-east), Bridgend (5 miles south-west), New Quay (11 miles north-east), Llandudoch (6 miles south-west) and Llandysul (12 miles south-east).

Near you in Rhosygadair Newydd

In Rhosygadair Newydd, that means homes near Ysgol Aberporth and St Michael's Church and the streets around them. Other landmarks nearby include Blaenporth Castle (1.3 miles south-east) and The Collectors Rendezvous (1.4 miles north-east). Not far away are Felinwynt.

Map of Rhosygadair Newydd © OpenStreetMap contributors

How the visit works

Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours, depending on the damage. Before we go, we will explain how long to leave it and what to avoid for the first few days.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the following day.

How to prepare

  • Keep a parking space free if you can
  • Let us know if it has been repaired before
  • Open a window if you can

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.

Get a free quote

Related advice

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Questions from Rhosygadair Newydd

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

What happens next?

We check the damage, the material and your postcode, then reply with a quote.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

I tried a repair kit. Can you fix it?

Yes. We take out the old repair and do it properly. Mention it when you send photos.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Is it worth repairing rather than replacing?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.