Warwickshire · England

Bath Repair for Ridge Lane homes

Damaged bath in Ridge Lane? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Ridge Lane homes

About our bath repair in Ridge Lane

A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. We regularly repair roll-top & freestanding, pressed steel enamel and cast iron enamel, and common reasons people get in touch are holes from dropped items and a cracked acrylic bath.

The work is covered for a year after we finish. Just call us if there is a problem and we will come back.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
Ridge Lane (CV10)
County
Warwickshire
Cover
A year, on every repair
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

What we do, step by step

Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. You can expect it to take a few hours, and we’ll keep you posted as we go.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, typically the next day.

Before we arrive

  • Tell us if there are stairs or a lift
  • Let the surface dry out before the visit
  • Have a window or extractor fan available

Ask for a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.

Get a fixed quote

Advice

Signs you need bath repair in Ridge Lane

Rust typically starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

The most common problems we’re called about are:

  • A chip where the taps sit
  • A chipped rim or side
  • Scuffs and scratches in the surface
  • Hairline or through cracks in acrylic

Questions to ask before booking

  • Whether a trained technician does the job
  • How soon you can use it again
  • How to look after the finish
  • What happens if they find more damage

Choosing a repair company

Aftercare tips

Good habits make a big difference to how long a repair lasts:

  • Keep abrasive pads and gritty cleaners away from the bath
  • Keep metal cans and razors off the surface
  • Clean with warm water and a mild detergent
  • Get any new chip repaired before it rusts

Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

Work for landlords and builders

For anyone letting property in or around Ridge Lane, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Repair or replace: which is better?

People often assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

What you get with us

  • Nothing taken out or refitted
  • Honest advice, even when it means no job
  • No extra charge for your area
  • Free fixed quotes from pictures

See our full price list or bath cost comparison.

Prices and what affects them

Repairs from £95. We don’t charge extra for travel to Ridge Lane. The price depends on:

  • How many areas need work
  • What kind of damage it is
  • How hard the colour is to match
  • Where the damage is and how we get to it

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Photographing the damage takes a minute. Try to send:

  • One sharp close-up of the damage
  • Any details about the material
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

What we can’t put right

Some jobs aren’t right for a repair, including:

  • Rust that has eaten right through a steel bath
  • Cracks in parts of an acrylic bath we can’t get to from below
  • Flexing caused by a failed cradle or loose feet

Send us photos and we’ll tell you honestly before booking.

Materials we work on in Ridge Lane

  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel

Our work in Ridge Lane

Ridge Lane is about 5 miles north-west of Nuneaton, in Warwickshire. Anywhere in CV10, we carry out the work at your property. We work in all 324 towns and villages across Warwickshire, from the larger towns to small villages. Our jobs stretch from Ridge Lane to Birmingham (15 miles away).

Here we cover the CV10 postcode area. Local streets include Ridge Lane, Arden Forest Estate and Wakeford Close. If you’re just outside Ridge Lane, we cover Birchley Heath (1 mile south-west), Bentley (1 mile north-west), Oldbury (1 mile east), Baxterley (2 miles north-west) and Merevale (2 miles north). We also work in nearby towns such as Nuneaton (5 miles south-east), Bedworth (6 miles south-east), Kenilworth (14 miles south), Fordbridge (9 miles south-west), Castle Vale (9 miles west) and Chilvers Coton (5 miles south-east).

Around Ridge Lane

Locally, our jobs take us to homes close to The Queen Elizabeth Academy, among other places. For rail, the closest station is Atherstone station, roughly 2 miles north. Nearby you will also find George Eliot Hospital (4.8 miles south-east) and Atherstone Heritage Centre (2 miles north-east).

Map of Ridge Lane © OpenStreetMap contributors

Your questions about bath repair in Ridge Lane

Is the work guaranteed?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

How invisible is a bath repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

What areas do you cover?

Everywhere in the UK, Ridge Lane included. There is no extra charge for travel.

How do I book?

Just pictures, your postcode and a contact number. On the day, access to the room.

Can you fix rust around the plughole?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.