Lancashire · England
Bath Repair in Rimington
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Rimington and across Lancashire. Free, fixed quotes from your photos.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Chips on the rim or sides
Bath repair in Rimington, done in place
A typical bath repair is a few hours’ work, and you can generally bathe again the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. If you’re dealing with chips along the edge of the bath and impact holes in acrylic, we can help, whatever the material.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Rimington (BB7)
- Region
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
- Don’t scrub with anything abrasive
- If an acrylic bath flexes, have its feet adjusted
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
How the visit works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a few hours, depending on the damage, and you are welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the day after, the bath is ready to use.
Getting ready for the visit
- Make sure the room can be ventilated
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
Get a quote
For a price in Rimington, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Questions from Rimington
What about rust by the waste?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Where we work around Rimington
Rimington is about 4 miles west of Barnoldswick, in Lancashire. From the centre of Rimington to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 482 towns and villages in Lancashire. Our nearest city page is Manchester, about 30 miles away.
Our visits in BB7 are booked in the same way as anywhere else. We regularly work on streets such as Stopper Lane, Newby Lane and Rimington Lane and the roads around them. If you are just outside Rimington, we cover Newby (1 mile east), Howgill (1 mile east), Gisburn (2 miles north-east), Horton (4 miles north-east) and Halton West (6 miles north). Larger places within reach include Burnley (8 miles south), Accrington (11 miles south), Nelson (6 miles south-east), Rawtenstall (14 miles south), Colne (6 miles south-east) and Clitheroe (5 miles south-west).
What’s near Rimington
Rimington’s nearest station is Clitheroe station, about 4.9 miles south-west. Further afield, we also cover the area around Clitheroe Community Hospital (3.5 miles south-west) and Tom Varley Museum of Steam (1.4 miles east). Green spaces nearby include Salthill Quarry and Weets Hill.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Why repair rather than replace?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. We charge the same wherever you are, so there’s no premium for Rimington. What changes the price is the job itself: the material, the amount of damage and how many items.
Why choose Surface Doctor in Rimington
- Typically one visit, start to finish
- Repair technicians who travel to you, UK-wide
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page or bath cost comparison.
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- Whether old repairs or coatings need taking off
- The material
- How easy the damage is to reach
- How many areas need work
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
You can take the photos on your phone. Just make sure we can see:
- Any details about the material
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Also near Rimington
Other services in Rimington
When to call us in Rimington
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
The things clients usually mention when they call are:
- Snagging damage from a refit
- A cracked acrylic bath
- Chips along the edge of the bath
- A kit repair that didn’t last
What to look for in a quote
- How long the guarantee is and what it covers
- Whether they match the colour on site
- Who will actually do the work
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
