Newport · Wales
Bath chip & crack repair in Riverside, Newport
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Riverside, with a one-year guarantee on every repair.
- Repairs from £95
- Rust spots around the plughole
- Chips caused by builders
The process
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Advice
About our bath repair in Riverside
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s a chip where the taps sit and chips on the rim or sides, we can generally put it right, on acrylic, pressed steel enamel and cast iron enamel alike.
We stand behind the work with a one-year guarantee.
- Location
- Riverside (NP19, NP20, NP10)
- County
- Newport
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Covering Riverside
Riverside is about 1 mile north of Newport, in Newport. Clients in Riverside get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in 69 places in Newport, from the larger towns to small villages. Our jobs stretch from Riverside to Birmingham (about 76 miles away).
Jobs in NP19, NP20 and NP10 are booked in the same way as anywhere else. Local streets include Dos Road, Lyne Road and Cedar Road, and we cover them all. You will find Riverside on the A4042, which makes it straightforward to reach. Neighbouring places we cover include Barnardtown (1 mile south-east), Crindau (1 mile north-west), St Julians (1 mile north-east), Victoria (1 mile south) and Summer Hill (1 mile east). Further out, we also cover Rogerstone (3 miles west), Bassaleg (3 miles south-west), Graig (4 miles south-west), Garth (3 miles west), Duffryn (3 miles south-west) and Tredegar Park (3 miles south-west).
Near you in Riverside
We visit homes around St Julian's School, Glan Usk Primary School and The Victoria pub and the streets around them. Other local landmarks include Church of SS Julius and Aaron (within half a mile north-east), Belle Vue Park (1.4 miles south-west) and Greenfields School (1.3 miles south-west). The nearest railway station is Newport (South Wales) station, roughly 0.8 miles south-west of the centre. Nearby you’ll also find Caerleon Roman Fortress and Baths (1.7 miles north-east) and Friars Walk (0.8 miles south). Open spaces near Riverside include Somerton and Brynglas.
Your questions about bath repair in Riverside
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Do you cover the entire of Newport?
All of Newport, and the rest of the UK. There is no extra charge for travel.
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
What about rust by the waste?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Repair or replace: which is better?
Replacing a fitted bath normally means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in one visit. Prices start from £95. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- No need to remove anything
- Technicians who travel to you, UK-wide
- A fixed quote before booking
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page or bath cost comparison.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Looking after it afterwards
To keep it looking its best for years:
- Avoid scourers, wire wool and gritty cream cleaners
- Keep metal cans and razors off the surface
- Fix dripping taps early to stop staining and limescale
- Cover the bath during DIY or decorating
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Signs you need bath repair in Riverside
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
If you can see any of these, send us a picture:
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
- Rust by the waste and overflow
- A chip where the taps sit
Questions to ask before booking
- How to look after the finish
- How the room is protected while they work
- When it can be used again
- If travel is included in the price
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- Wear across the whole surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
Nearby places to Riverside
Other services in Riverside
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
