Glasgow · Scotland
Bath chip & crack repair in Robroyston, Glasgow
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Robroyston and across Glasgow. Free, fixed quotes from your pictures.
- Repairs from £95
- Snagging damage from a refit
- Impact holes in acrylic
How we handle bath repair in Robroyston
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour matched so it blends in. Typical jobs include a chip where the taps sit and rust spots around the plughole, across cast iron enamel, acrylic and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Robroyston (G33, G64, G21)
- Area hub
- Glasgow
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Robroyston
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Is repairing better than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Robroyston.
Robroyston and the surrounding area
Robroyston is about 2 miles south-east of Bishopbriggs, in Glasgow. From the centre of Robroyston to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 183 places across Glasgow.
We work across the G33, G64 and G21 postcode area and the streets around it. We regularly work on streets such as Rae Avenue, Cumnock Road and Dochart Avenue and the roads around them. Other places close to Robroyston include Millerston (1 mile south-east), Hogganfield (1 mile south), Blackhill (2 miles south), Craigend (2 miles south-east) and Riddrie (2 miles south). We also work in nearby towns such as Glasgow (5 miles south-west), Hillhead (4 miles west), Dowanhill (5 miles west), Woodlands (4 miles south-west), Woodside (4 miles west) and North Kelvinside (4 miles west).
Near you in Robroyston
In Robroyston, that means homes near All Saints RC Secondary and Springburn Park, among other places. The closest station to Robroyston is Robroyston station, about 0.6 miles south-east. Nearby you’ll also find Bishop's Castle (3.1 miles south-west) and Stobhill Hospital (1.6 miles west). The countryside around Robroyston includes Lenzie Moss and Hogganfield Loch.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
What we can’t put right
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Wear across the whole surface, which needs re-enamelling
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to look after it.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the day after, the bath is ready to use.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know about parking or access
- Let us know if it has been repaired before
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why book with us
- One visit for most repairs
- No need to remove anything
- Colour mixed on the day to match
- A year’s guarantee on all work
See our full price list or bath cost comparison.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Common problems we fix in Robroyston
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.
You may need us if you’ve spotted any of these:
- Damage beneath the taps
- A cracked acrylic bath
- A hole punched through by something heavy
- A chipped rim or side
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- What prep work is covered
- How the colour is matched
- What happens if they find more damage
Also near Robroyston
Other services in Robroyston
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
- Put a towel in the bath if you’re working above it
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
What affects the price in Robroyston
Prices start from £95. We price every job individually. The main factors are:
- Where the damage is and how we get to it
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Two or three clear photos are usually enough. It helps if you send:
- A photo taken from further back
- Your postcode, so we can check dates
- The material, if you know it
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
