Leicestershire · England
Bath chip & crack repair in Rolleston, Leicestershire
Bath repair in and around Rolleston: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- Scratches you can feel with a fingernail
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
How we handle bath repair in Rolleston
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and people most often call us about rusty patches near the plughole and an old repair that has yellowed or come loose.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Rolleston (LE7)
- Region
- Leicestershire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath repair in Rolleston
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Are there extra charges for Rolleston?
There’s no separate call-out charge. The fixed price covers the visit and the work.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Do you cover Rolleston?
We do. We send a technician to Rolleston for every job, and the price is the same as everywhere else.
How do I get a price for bath repair in Rolleston?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Get any new chip repaired before it rusts
- Cover the bath during DIY or decorating
- Store metal items away from the bath
- Rinse the bath after use, especially in hard water areas
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
When a repair isn’t the answer
To be straight with you, there are a few things a repair won’t fix:
- Water coming from the waste or taps rather than the bath
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Rolleston
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
What else we do in Rolleston
Where we work around Rolleston
Rolleston is about 6 miles east of Oadby, in Leicestershire. Whether you’re in the middle of Rolleston or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 287 places in Leicestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 42 miles away.
Our visits in LE7 work the same way as everywhere else we cover. We also cover the places around Rolleston: Noseley (1 mile south), Three Gates (2 miles south-west), Illston on the Hill (2 miles south-west), Shangton (3 miles south) and King's Norton (3 miles west). Larger places within reach include Wigston (8 miles west), Melton Mowbray (12 miles north), Syston (9 miles north-west), Lutterworth (15 miles south-west), Blaby (11 miles west) and Broughton Astley (13 miles west).
Local landmarks in Rolleston
Typical jobs here are in homes near Church of St John. Nearby you will also find Billesdon Rural District (2 miles north-west) and Sauvey Castle (4.5 miles north-east).
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
What we do, step by step
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for a few hours, depending on the damage. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
Preparing for the visit
- Let the surface dry out before the visit
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Ask for a price
Send us a picture of the damage and a wider shot of the entire item, with your LE7 postcode, and we’ll reply with a fixed price.
Related advice
Landlords, agents and businesses in Rolleston
We work for landlords, letting agents and housing providers in Rolleston as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
What you get with us
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
- One-year guarantee on every repair
- No need to remove anything
See our full price list and resurfacing vs replacement cost guide.
Prices and what affects them
Repairs from £95. We price every job individually. What matters most is:
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- How many items we do on one visit
- The type of damage
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
You can normally get a fixed quote without us visiting. To make it quick:
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- The material, if you know it
- A coin or ruler next to the damage for scale
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
