Warwickshire · England
Bath Repair in Rookery
Our technicians come to Rookery for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Hairline or through cracks in acrylic
How we handle bath repair in Rookery
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are rust spots around the plughole and a chip where the taps sit.
Big or small, you get the same one-year guarantee in Rookery and across Warwickshire.
- Location
- Rookery (B95)
- Region
- Warwickshire
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath repair in Rookery
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
These are the problems we are asked about most:
- Impact holes in acrylic
- Chips caused by builders
- Damage beneath the taps
- Scuffs and scratches in the surface
Questions to ask before booking
- How soon you can use it again
- Who turns up on the day
- Whether the price is fixed and includes VAT
- How the colour is matched
Places near Rookery
More services for Rookery
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- The type of damage
Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
You can usually get a fixed quote without us visiting. To help us price it:
- A wider photo showing the entire bath
- What it’s made of, if you know
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
How the visit works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the next day.
How to prepare
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Tell us about any previous repairs or coatings
Get a quote
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Rookery and the surrounding area
Rookery is about 7 miles west of Warwick, in Warwickshire. Wherever you are in the B95 postcode area, we come to you. Our technicians cover all 324 towns and villages in Warwickshire. We work right across the region, from Rookery to Birmingham (14 miles away).
Every address in B95 is within our area, from the main roads to the quietest streets. Close by, we cover Lowsonford (1 mile north), High Cross (1 mile north-east), Finwood (1 mile north-east), Bushwood (1 mile north) and Buckley Green (2 miles west). Within a short drive, we also cover Warwick (7 miles east), Royal Leamington Spa (9 miles east), Stratford-upon-Avon (7 miles south), Leamington Spa (8 miles east), Kenilworth (7 miles north-east) and Fordbridge (13 miles north).
Near you in Rookery
Typical jobs here are in homes near Henley-in-Arden School, St Luke and Fleur De Lys Public House. For rail, the closest station is Claverdon station, about 2.2 miles south-east of the centre. Well-known places in the area include Morton Bagot Castle (4.6 miles west) and St Michael's Hospital (5.9 miles east). For a walk, there is Henley Sidings.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps early to stop staining and limescale
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you’re working above it
- Do not leave a fresh chip for long
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
Common questions in Rookery
How invisible is a bath repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Rookery.
What we cannot put right
A few problems are outside what a surface repair can do:
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Warwickshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Landlords, letting agents and housing providers in Rookery use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
