Warwickshire · England
Bath chip & crack repair in High Cross, Warwickshire
Damaged bath in High Cross? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- Chips along the edge of the bath
Signs you need bath repair in High Cross
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
These are the problems we’re asked about most:
- Chips on the rim or sides
- An old repair that has yellowed or come loose
- Scuffs and scratches in the surface
- Impact holes in acrylic
What your quote should include
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- How to look after the finish
- If travel is included in the price
How we handle bath repair in High Cross
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We work on pressed steel enamel, whirlpool & spa baths and acrylic, and common reasons people get in touch are chips caused by builders and holes from dropped items.
You get a one-year guarantee, the same in High Cross as everywhere else we work.
- Area
- High Cross (CV35)
- Area hub
- Warwickshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the day after, the bath is ready to use.
Before we arrive
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why book with us
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- Work done at your home or business
- Honest advice, even when it means no job
See our pricing and resurfacing vs replacement cost guide.
What a repair cannot fix
Before booking, it’s worth knowing the limits too:
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Common questions in High Cross
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Do you work in High Cross?
Yes. We work across the UK and come to High Cross. Send us photos for a fixed quote, or call 0345 017 0787.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
What areas do you cover?
We work UK-wide, and that includes High Cross. Prices don’t change with location.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What happens if you find more damage?
The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
How to care for the repair
Simple care helps the repair last. We recommend:
- Don’t scrub with anything abrasive
- Do not leave razors or cans standing in the bath
- Stick to mild cleaners and a soft cloth
- Rinse it down after each bath
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
About High Cross
High Cross is about 6 miles west of Warwick, in Warwickshire. Across the CV35 area, we carry out the work at your property. High Cross is one of 324 places in Warwickshire we cover. Our nearest city page is Birmingham, about 14 miles away.
Jobs in CV35 work the same way as everywhere else we cover. Whether you live on Back Lane, High Cross Lane and Narrow Lane or a nearby road, a technician can come to you. We also cover the places around High Cross: Finwood (1 mile north-west), Lowsonford (1 mile west), Rowington (1 mile north), Rookery (1 mile south-west) and Bushwood (1 mile north-west). Further out, we also cover Warwick (6 miles east), Royal Leamington Spa (8 miles east), Stratford-upon-Avon (8 miles south), Bedworth (15 miles north-east), Leamington Spa (7 miles east) and Kenilworth (6 miles north-east).
Local landmarks in High Cross
Typical jobs here are in homes near St Luke and Fleur De Lys Public House and the streets around them. The closest station to High Cross is Hatton station, about 1.8 miles south-east. Other landmarks nearby include Baddesley Clinton (2.3 miles north) and St Michael's Hospital (5 miles east). The countryside around High Cross includes Henley Sidings.
Towns and villages near High Cross
Other services in High Cross
About our accreditations · Every repair comes with a one-year guarantee.
