Leicester · England

Bath Repair in Rowlatts Hill

Chip and crack repairs to enamel, acrylic and cast iron baths in Rowlatts Hill, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Impact holes in acrylic
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Rowlatts Hill?

How we handle bath repair in Rowlatts Hill

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We work on acrylic, whirlpool & spa baths and cast iron enamel, and the jobs we see most are snagging damage from a refit and hairline or through cracks in acrylic.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Area
Rowlatts Hill (LE5)
Area hub
Leicester
Guarantee
12 months on all our work
Quotes
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Keeping it looking good

Once the work has cured, treat it gently:

  • Rinse it down after each bath
  • Avoid scourers, wire wool and gritty cream cleaners
  • Fix dripping taps early to stop staining and limescale
  • Have new chips seen to early

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.

Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.

Repair or replace: which is better?

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Why us?

  • One visit for most repairs
  • No extra charge for your area
  • We’ll tell you if it’s not worth repairing
  • Colour-matched on site

See our prices page or resurfacing vs replacement cost guide.

Rowlatts Hill and the surrounding area

Rowlatts Hill is about 2 miles east of Leicester, in Leicester. Whether you’re in the middle of Rowlatts Hill or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 35 towns and villages across Leicester, from the larger towns to small villages. Our jobs stretch from Rowlatts Hill to Birmingham (about 36 miles away).

Our visits in LE5 work the same way as everywhere else we cover. Jobs here include addresses on Gamel Road, Walshe Road and Amyson Road and the roads around them. Neighbouring places we cover include Goodwood (1 mile north), Evington (1 mile south), North Evington (1 mile west), Humberstone (1 mile north) and Thurnby (1 mile east). Further out, we also cover Oadby (3 miles south), Braunstone Town (4 miles west), Leicester Forest East (6 miles west), Belgrave (3 miles north-west), Birstall (4 miles north-west) and Newfoundpool (3 miles west).

Around Rowlatts Hill

In Rowlatts Hill, that means homes near The Stirrup Cup pub, Roman Catholic Church of St Joseph and Whitehall Primary School and the streets around them. Also close by are Oakham House (1.2 miles north), St Paul's Catholic School (under half a mile south-east) and Humberstone Park LNR (0.7 miles north-west). The nearest railway station is Leicester station, about 2 miles west of the centre. Well-known places in the area include Leicester General Hospital (within half a mile south-west) and Haymarket Shopping Centre (2.4 miles west).

  • Local facilities include Coleman (0.8 miles west)
Map of Rowlatts Hill © OpenStreetMap contributors

What we do, step by step

We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, depending on the damage, and we leave the room as we found it.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the following day.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Keep pets and children out of the room while we work
  • Mention any earlier repairs or resurfacing

How to get a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Advice

When a repair isn’t the answer

A repair isn’t right for every job, including:

  • A steel bath rusted through
  • A bath worn all over, where resurfacing makes more sense
  • Flexing caused by a failed cradle or loose feet

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Rowlatts Hill

  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic

What bath repair costs

Repairs from £95. You will know the full cost before booking. We look at:

  • Whether it’s a chip, crack, burn or wear
  • The material and finish
  • Access to the area
  • How many items we do on one visit

Our prices are the same across the UK, with no extra for Rowlatts Hill. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your photos

Good photos mean an accurate price. Here’s what we find most useful:

  • Good light, ideally daylight, without flash glare
  • The material, if you know it
  • A coin or ruler next to the damage for scale
  • Where you are, by postcode

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Questions from Rowlatts Hill

Can you repair something that is been repaired before?

Generally, yes. The old repair comes out first, so mention it when you send pictures.

Do you charge for travel?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

What happens after I send pictures?

We come back with a fixed price, plus dates. You’re under no obligation.

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.

How much does bath repair cost in Rowlatts Hill?

Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Work for landlords and builders

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Signs you need bath repair in Rowlatts Hill

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.

Get in touch if you’ve noticed:

  • Cracks in an acrylic bath
  • Holes from dropped items
  • Scuffs and scratches in the surface
  • Rusty patches near the plughole

What to look for in a quote

  • If travel is included in the price
  • Whether the price is fixed and includes VAT
  • What preparation is included
  • How changes to the job are handled

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.