West Sussex · England
Bath chip & crack repair in Rusper, West Sussex
Damaged bath in Rusper? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- Cracks in an acrylic bath
How we handle bath repair in Rusper
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our repair technicians work on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and common reasons people contact us are rust spots around the plughole and a chipped rim or side.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Rusper (RH12)
- County
- West Sussex
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
About Rusper
Rusper is about 4 miles west of Crawley, in West Sussex. Across the RH12 area, a technician comes to you. We work in all 371 towns and villages in West Sussex, from the larger towns to small villages. Our nearest city page is London, about 27 miles away.
Our technicians cover all of RH12. Jobs here include addresses on High Street, Cooks Mead and Chalice Walk and the roads around them. Neighbouring places we cover include Lambs Green (1 mile east), Ifieldwood (2 miles east), Russ Hill (3 miles north-east), Bewbush (3 miles south-east) and Cudworth (3 miles north). Further out, we also cover Crawley (4 miles east), Horsham (4 miles south-west), Haywards Heath (12 miles south-east), Burgess Hill (13 miles south-east), East Grinstead (12 miles east) and Broadfield (4 miles south-east).
Local landmarks in Rusper
In Rusper, that means homes near St Mary Magdalene church and Rusper Primary School. The nearest railway station is Faygate station, about 1.8 miles south. Further afield, we also cover the area around Crawley Museum (3.9 miles east) and Crawley Hospital (3.6 miles east). Not far away are Vann Lake and Warnham LNR.
What a repair can’t fix
Before you book, it’s worth knowing the limits:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Rusper questions
Can you repair a hole in a bath?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Can you repair a failed DIY repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
What bath repair costs
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- How much damage there is
- How easy the damage is to reach
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your pictures
When you take your pictures, these tips help us give you a firm price:
- Any details about the material
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Should you replace it?
Swapping a damaged bath for a new one generally means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Our bath repair starts from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Why choose Surface Doctor in Rusper
- Rooms protected and left tidy
- Straight answers about what a repair can do
- Colour-matched on site
- Work done at your home or business
See our pricing or guide to resurfacing and replacement costs.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Places near Rusper
More services for Rusper
Do you need bath repair in Rusper?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Get in touch if you’ve noticed any of these:
- A cracked acrylic bath
- Snagging damage from a refit
- Holes from dropped items
- Deep scratches in acrylic
What to look for in a quote
- What happens if the damage is worse than the photos show
- How to look after the finish
- Whether the price covers travel
- The length of the guarantee and what it covers
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take two to three hours for most chips, and you’re welcome to carry on with your day while we work.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Open a window if you can
- Tell us about any previous repairs or coatings
- Let us know about parking or access
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
