Herefordshire · England
Bath chip & crack repair in Sallys, Herefordshire
Fixed-price bath repair in Sallys and the surrounding area, generally in one visit and guaranteed for a year.
- Repairs from £95
- Damage beneath the taps
- Holes from dropped items
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a few hours, depending on the damage. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
Getting a price
Most clients in Sallys get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Bath repair in Sallys, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. If you’re dealing with an old repair that has yellowed or come loose and rust by the waste and overflow, we can normally put it right, on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel alike.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Where
- Sallys (HR3)
- Area hub
- Herefordshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Sallys
Other services in Sallys
What we’re called out for in Sallys
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
If you can see any of these, send us a picture:
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
- A chipped rim or side
What to look for in a quote
- What aftercare is recommended
- What happens if they find more damage
- Whether a trained technician does the job
- What prep work is covered
Covering Sallys
Sallys is about 11 miles north-west of Hereford, in Herefordshire. Across the HR3 area, we carry out the work at your property. Sallys is one of 255 places in Herefordshire where we work. We work right across the region, from Sallys to Birmingham (about 50 miles away).
Every address in HR3 is covered. Nearby, we also work in Logaston (1 mile north-west), Norton Wood (1 mile south-east), Calver Hill (1 mile south-east), Woonton (1 mile north) and Hopley's Green (2 miles north-west). Within a short drive, we also cover Hereford (11 miles south-east), Leominster (10 miles north-east), Redhill (12 miles south-east), Newton Farm (11 miles south-east), Whitecross (11 miles south-east) and Eign Hill (12 miles south-east).
Around Sallys
Typical jobs here are in homes near St James's Church and the streets around them. Other landmarks nearby include Weobley Museum (3 miles east) and Kinnersley Castle (0.7 miles south-west). Open spaces near Sallys include Birches Farm and Garnons Hill.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Do not leave a fresh chip for long
- Keep metal cans and razors off the surface
- Do not scrub with anything abrasive
- A dripping tap stains enamel, so fix it early
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
FAQs for Sallys
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
What areas do you cover?
We cover the whole UK, including Sallys and the rest of Herefordshire. Just include your postcode and we will offer you dates.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
When a repair is not the answer
We will always be straight with you, so here’s what a repair cannot fix:
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What bath repair costs
Prices start from £95. You’ll know the full cost before you book. We look at:
- Whether old repairs or coatings need taking off
- The material
- What kind of damage it is
- The colour and finish to match
Our prices are the same across the UK, so there is no premium for Sallys. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
It only takes a minute to photograph the damage. Try to send:
- Where you are, by postcode
- Something in shot to show the size
- Details of any past repairs
- One picture of the whole bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
For landlords and businesses
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Landlords, letting agents and housing providers in Sallys use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
