Herefordshire · England
Bath Repair for Norton Wood homes
We travel to Norton Wood for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- A hole punched through by something heavy
Bath repair in Norton Wood without replacing anything
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Common call-outs are for chips along the edge of the bath and deep scratches in acrylic, across whirlpool & spa baths, acrylic and cast iron enamel.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Area
- Norton Wood (HR4)
- County
- Herefordshire
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Nearby places to Norton Wood
Also in Norton Wood
Your questions about bath repair in Norton Wood
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
What does bath repair cost?
Repairs from £95. We give a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote with dates.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Landlords, agents and businesses in Norton Wood
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Landlords, letting agents and housing providers in Norton Wood use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Repair or replace in Norton Wood?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Why book with us
- Colour mixed on the day to match
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Most jobs done in one visit
Read our prices page and guide to resurfacing and replacement costs.
What affects the price in Norton Wood
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- Whether it’s a chip, crack, burn or wear
- The material
- How hard the colour is to match
- Where the damage is and how we get to it
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- A photo taken from further back
- Any earlier repairs or coatings
- What it’s made of, if you know
- Something in shot to show the size
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
About Norton Wood
Norton Wood is about 10 miles north-west of Hereford, in Herefordshire. Across the HR4 area, we carry out the work at your property. We work in all 255 towns and villages in Herefordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 50 miles away.
We work across the HR4 postcode area. Neighbouring places we cover include Calver Hill (1 mile east), Norton Canon (1 mile east), Sallys (1 mile north-west), Staunton on Wye (2 miles south) and Logaston (2 miles north-west). Within a short drive, we also cover Hereford (10 miles south-east), Leominster (10 miles north-east), Redhill (11 miles south-east), Newton Farm (10 miles south-east), Whitecross (10 miles south-east) and Eign Hill (11 miles south-east).
Landmarks near Norton Wood
We visit homes around Church of St Nicholas and the streets around them. Nearby you will also find Kinnersley Castle (1.4 miles north-west) and Weobley Museum (3.1 miles north-east). For a walk, there’s Garnons Hill.
What we are called out for in Norton Wood
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
Keep an eye out for these signs:
- Rusty patches near the plughole
- Impact holes in acrylic
- A cracked acrylic bath
- Scuffs and scratches in the surface
What your quote should include
- How soon you can use it again
- If travel is included in the price
- How changes to the job are handled
- What the guarantee covers, and for how long
How the visit works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes two to three hours for most chips, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
Getting a price
Upload a photo of the damage and a wider shot of the entire item, and tell us you’re in Norton Wood, and we’ll reply with a fixed quote.
Advice
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
What we cannot put right
Some jobs are not right for a repair, including:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
- Cracks in acrylic we cannot reach from underneath
Send us photos and we’ll tell you honestly before booking.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
