Dorset · England
Bath Repair in Salway Ash
Problem with your bath in Salway Ash? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Rust by the waste and overflow
- Chips under the taps
How we handle bath repair in Salway Ash
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. Typical jobs include deep scratches in acrylic and damage done while the bathroom was being fitted, on pressed steel enamel, acrylic and cast iron enamel.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Location
- Salway Ash (DT6)
- Area hub
- Dorset
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
We will not take on work that won’t last, so these are the limits:
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Aftercare tips
Once the work has cured, treat it gently:
- Keep metal cans and razors off the surface
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
- Protect the bath with a towel when doing jobs nearby
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Landlords, agents and businesses in Salway Ash
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Salway Ash as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Also near Salway Ash
Other services in Salway Ash
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Where we work around Salway Ash
Salway Ash is about 2 miles north of Bridport, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Salway Ash is one of 462 towns and villages in Dorset we cover.
Postcode districts we cover here: DT6. Streets in the area include Salway Drive, Pitchers and Ash Farm Close. Other places close to Salway Ash include Dottery (1 mile south), South Bowood (1 mile north-west), Atrim (1 mile south-west), Pymore (2 miles south-east) and The Mount (2 miles east). Larger places within reach include Dorchester (15 miles east), Fordington (15 miles east), Lyme Regis (8 miles west), Beaminster (3 miles north-east), Charminster (14 miles east) and Charmouth (6 miles west).
Landmarks near Salway Ash
We visit homes around Salway Ash Church of England Voluntary Aided Primary School, The Sir John Colfox Academy and Holy Trinity. Well-known places in the area include Chideock and Seatown Museum (3 miles south-west) and Bridport Community Hospital (1.8 miles south). For a walk, there is Waddon Hill.
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take a few hours, depending on the damage, and you can get on with other things while we’re there.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Salway Ash clients choose us
- Free fixed quotes from pictures
- One-year guarantee on every repair
- Work done at your home or business
- We leave the room as we found it
See our prices page or guide to resurfacing and replacement costs.
Common questions in Salway Ash
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
How long before I can use the bath?
Generally the next day. We’ll tell you the exact curing time when we finish.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
How we price bath repair
Prices start from £95. We charge the same across the UK, including Salway Ash. The price reflects:
- The material and finish
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- How many areas need work
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
How to get a fixed quote
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- Your postcode, so we can check dates
- A picture taken from further back
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
