Telford and Wrekin · England
Bath Repair for Sambrook homes
Damaged bath in Sambrook? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A hole punched through by something heavy
- A cracked acrylic bath
About our bath repair in Sambrook
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. Our repair technicians work on acrylic, cast iron enamel and pressed steel enamel, and the jobs we see most are rusty patches near the plughole and deep scratches in acrylic.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Sambrook (TF10)
- Area hub
- Telford and Wrekin
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- A steel bath rusted through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Sambrook
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Towns and villages near Sambrook
More services for Sambrook
Where we work around Sambrook
Sambrook is about 4 miles north-west of Newport, in Telford and Wrekin. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover all 79 towns and villages in Telford and Wrekin, from the larger towns to small villages. You can also see our page for Birmingham, about 33 miles away.
Every address in TF10 is covered. Other places close to Sambrook include Standford Bridge (1 mile south-west), Hinstock (2 miles north-west), Woodlane (2 miles north-west), High Heath (2 miles north-west) and Soudley (3 miles north). Larger places within reach include Telford (9 miles south), Wellington (9 miles south-west), Dawley (11 miles south), Oakengates (8 miles south), Newport (4 miles south-east) and The Rock (10 miles south).
Around Sambrook
Locally, our jobs take us to homes close to Church of St. Luke, among other places. A little further out are Weston Jones Motte (3.3 miles east). The countryside around Sambrook includes Aqualate Mere and Quarry Wood.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
Sambrook questions
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What happens after I send photos?
We come back with a fixed price. You’re under no obligation.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you repair something that’s been repaired before?
Normally, yes. The old repair comes out first, so let us know about it.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Do you need bath repair in Sambrook?
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
People typically call us after spotting one of these:
- A hole punched through by something heavy
- Rusty patches near the plughole
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
What your quote should include
- A fixed quote, and whether VAT is included
- What protection goes down before work starts
- Aftercare advice
- How the colour is matched
Why repair rather than replace?
People often assume a cracked or chipped bath has to come out. Generally it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Normally one visit, start to finish
- Colour mixed on the day to match
- A fixed quote before you book
- We will tell you if it’s not worth repairing
See our full price list and guide to resurfacing and replacement costs.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a few hours, depending on the damage. We clean up when we’re done and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the next day.
Getting ready for the visit
- Open a window if you can
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
Get a quote
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say immediately if a repair is the right fix.
Related advice
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
What affects the price in Sambrook
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- How hard the colour is to match
- Whether we combine several jobs
- The material
- How easy the damage is to reach
The price reflects the work involved, not your postcode. The full price is agreed before booking.
How to get a fixed price
Before you send pictures, these tips help us give you a firm price:
- Something in shot to show the size
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
Most customers in Sambrook get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
