Telford and Wrekin · England
Bath Repair in Standford Bridge
Bath repair for Standford Bridge, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Chips on the rim or sides
- Hairline or through cracks in acrylic
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Fix dripping taps early to stop staining and limescale
- Put a towel in the bath if you’re working above it
- Rinse the bath after use, especially in hard water areas
- Don’t leave razors or cans standing in the bath
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Bath repair at your home in Standford Bridge
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the next day. If you are dealing with rust spots around the plughole and a chip where the taps sit, we can typically put it right.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Where
- Standford Bridge (TF10)
- County
- Telford and Wrekin
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Wear across the whole surface, which needs re-enamelling
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
How we price bath repair
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Previous DIY repairs that have to come out
- What the surface is made of
- Access to the area
- Unusual colours or finishes
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
You can generally get a fixed price without us visiting. To make it quick:
- Whether it’s been repaired or coated before
- Any details about the material
- Natural light rather than flash
- A photo taken from further back
If you’re in Standford Bridge and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Standford Bridge questions
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Are there extra charges for Standford Bridge?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You will get a fixed figure before you book.
How invisible is a bath repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.
Materials and what they mean for the repair
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Landlord and trade work in Standford Bridge
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Do you need bath repair in Standford Bridge?
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Keep an eye out for these signs:
- A cracked acrylic bath
- Damage beneath the taps
- Rusty patches near the plughole
- Chips caused by builders
Comparing quotes
- How soon you can use it again
- What preparation is included
- A fixed price, and whether VAT is included
- How changes to the job are handled
How it works
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Clear the area around the damage
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Getting a price
Send us a picture of the damage and a wider shot of the whole item, with your TF10 postcode, and we will come back with a fixed quote.
Read more
Should you replace it?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why Standford Bridge customers choose us
- Rooms protected and left tidy
- A year’s guarantee on all work
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list and resurfacing vs replacement cost guide.
Towns and villages near Standford Bridge
Other services in Standford Bridge
Standford Bridge and the surrounding area
Standford Bridge is about 4 miles north-west of Newport, in Telford and Wrekin. Our technicians come to customers in Standford Bridge and the surrounding area, so nothing has to leave your home. Our repair technicians cover all 79 towns and villages across Telford and Wrekin, from the larger towns to small villages. You can also see our page for Birmingham, about 33 miles away.
We work across the TF10 postcode area and the streets around it. We also cover the places around Standford Bridge: Sambrook (1 mile north-east), Hinstock (2 miles north-west), Woodlane (2 miles north), High Heath (2 miles north-west) and Child's Ercall (2 miles west). Further out, we also cover Telford (9 miles south), Wellington (8 miles south), Dawley (10 miles south), Oakengates (8 miles south), Newport (4 miles south-east) and The Rock (9 miles south).
Local landmarks in Standford Bridge
Typical jobs here are in homes near Church of St. Luke, among other places. Well-known places in the area include Cheswardine Castle (4 miles north). The countryside around Standford Bridge includes Aqualate Mere and Quarry Wood.
About our accreditations · Every repair comes with a one-year guarantee.
