Devon · England

Bath Repair for Sampford Courtenay homes

Our technicians come to Sampford Courtenay for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Sampford Courtenay

Common questions in Sampford Courtenay

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

When can I have a bath again?

Normally within a day, depending on the repair.

Can you redo an old repair?

Regularly. We strip it out, deal with any rust and repair it again.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Do you charge for travel?

There is no separate call-out charge. Your fixed quote includes everything.

Do you cover Sampford Courtenay?

Yes, we do. Repair technicians travel to Sampford Courtenay from across the region, and the price is the same as everywhere else.

Is a cracked acrylic bath repairable?

Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.

Bath repair in Sampford Courtenay without replacing anything

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for holes from dropped items and a cracked acrylic bath, on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Location
Sampford Courtenay (EX20)
Area hub
Devon
Cover
A year, on every repair
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Should I try a DIY kit first?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

What we can’t put right

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Flexing caused by a failed cradle or loose feet
  • Wear across the whole surface, which needs re-enamelling
  • Water coming from the waste or taps rather than the bath

Not sure? Send photos and we will give you a straight answer before you book.

Surfaces we repair

  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel

What happens on the day

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for two to three hours for most chips. Before leaving, we tell you when it can be used and how to look after it.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the day after.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Have somewhere for us to park nearby if possible
  • Mention if the room is upstairs or in a flat

Get a quote

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a fixed price

Related advice

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Don’t scrub with anything abrasive
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Don’t leave razors or cans standing in the bath
  • A dripping tap stains enamel, so fix it early

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.

Common problems we fix in Sampford Courtenay

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

Send us a picture if you notice any of these:

  • Deep scratches in acrylic
  • A hole punched through by something heavy
  • Chips caused by builders
  • A kit repair that didn’t last

What to look for in a quote

  • Whether they match the colour on site
  • What happens if the damage is worse than the photos show
  • If travel is included in the price
  • The length of the guarantee and what it covers

10 questions to ask before booking

Materials and what they mean for the repair

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

What affects the price in Sampford Courtenay

Repairs from £95. Prices are worked out job by job, from your photos. What matters most is:

  • The size and number of damaged areas
  • Access to the area
  • Whether old repairs or coatings need taking off
  • The type of damage

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

How to get a fixed quote

Before you send pictures, these tips help us give you a firm price:

  • The material, if you know it
  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Sampford Courtenay and nearby

Sampford Courtenay is about 19 miles north-east of Tavistock, in Devon. From the centre of Sampford Courtenay to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Sampford Courtenay is one of 586 places in Devon where we work.

All of EX20 is covered, from the main roads to the quietest streets. If you are just outside Sampford Courtenay, we cover Sampford Chapple (1 mile west), Belstone Corner (2 miles south), Stockley (4 miles south), Okehampton (4 miles south-west) and South Tawton (4 miles south). Further out, we also cover Crediton (13 miles east), Great Torrington (14 miles north-west), Hatherleigh (6 miles west), Winkleigh (4 miles north), Chagford (9 miles south-east) and Moretonhampstead (12 miles south-east).

Landmarks near Sampford Courtenay

Our clients here include homes close to Church of St Andrew. The nearest railway station is Okehampton Interchange station, about 3.8 miles south. Nearby you’ll also find Okehampton Community Hospital (4.3 miles south-west) and Millsome Castle (3.6 miles north-east).

Map of Sampford Courtenay © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.