Nottinghamshire · England
Bath chip & crack repair in Saundby, Nottinghamshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Saundby. Free, fixed quotes from your photos.
- Repairs from £95
- A chipped rim or side
- Rust spots around the plughole
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. You will see the full price before you book.
Why book with us
- Colours mixed by hand to suit your surface
- One price list for the entire UK
- A fixed quote before booking
- A year’s guarantee on all work
Take a look at our prices page and resurfacing vs replacement cost guide.
Bath repair at your home in Saundby
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. We are often asked to fix a failed DIY repair that’s discoloured or lifting and scuffs and scratches in the surface, in whirlpool & spa baths, cast iron enamel and roll-top & freestanding.
Every repair comes with our one-year guarantee.
- Where
- Saundby (DN22)
- County
- Nottinghamshire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Saundby
Do you charge for travel?
There is no separate call-out charge. Your fixed price includes everything.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Which areas do you work in?
Across the UK, so Saundby is covered. Our prices are the same everywhere.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we will say what we think.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
How we price bath repair
Prices start from £95. We charge the same across the UK, including Saundby. The price reflects:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- The material
- Where the damage is and how we get to it
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Quotes from your photos
You can take the pictures on your phone. Just make sure we can see:
- A clear, close picture of the problem area
- Something in shot to show the size
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Where we work around Saundby
Saundby is about 2 miles south-west of Gainsborough, in Nottinghamshire. Wherever you are in the DN22 postcode area, we come to you. We cover all 329 towns and villages in Nottinghamshire. Our nearest city page is Leeds, about 42 miles away.
We work across DN22 and the streets around it. Streets in the area include Marsh Lane, Gainsborough Road and Ramper Road, all of which we cover. Close by, we cover Bole (1 mile south-east), North Wheatley (2 miles south-west), South Wheatley (2 miles south-west), Sturton le Steeple (3 miles south) and North Leverton with Habblesthorpe (4 miles south). Within a short drive, we also cover Worksop (14 miles west), Retford (7 miles south-west), New Ollerton (15 miles south-west), Kilton (13 miles south-west), Bracebridge (13 miles south-west) and Bawtry (9 miles west).
Around Saundby
In Saundby, that means homes near Queen Elizabeth's High School, St Martin of Tours' Church and Beckingham Primary School and the streets around them. The nearest railway station is Gainsborough Lea Road station, roughly 2 miles east. A little further out are John Coupland Hospital (2.2 miles north-east). The countryside around Saundby includes Beckingham Marshes RSPB Reserve.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Make sure an acrylic bath is firm underfoot
- Have new chips seen to early
- Put a towel in the bath if you are working above it
- Do not leave razors or cans standing in the bath
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
Also near Saundby
What else we do in Saundby
Landlord and trade work in Saundby
We work for landlords, letting agents and housing providers in Saundby as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Do you need bath repair in Saundby?
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.
Look out for these signs:
- Hairline or through cracks in acrylic
- A chip where the taps sit
- Holes from dropped items
- Rusty patches near the plughole
Questions to ask before booking
- Whether the colour is mixed to match
- What aftercare is recommended
- Whether the price covers travel
- What the guarantee covers, and for how long
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow two to three hours for most chips from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Ensure the area is dry
- Clear the area around the damage
- Let us know which floor the room is on
How to get a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
