Northumberland · England

Bath Repair for Seahouses homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Seahouses and across Northumberland. Send photos for a free, fixed quote.

  • Repairs from £95
  • Damage beneath the taps
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Seahouses

Bath repair in Seahouses, done in place

You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. If you’re dealing with damage beneath the taps and chips along the edge of the bath, we can normally put it right, on acrylic, roll-top & freestanding and pressed steel enamel alike.

Big or small, you get the same one-year guarantee in Seahouses and across Northumberland.

Area
Seahouses (NE68)
County
Northumberland
Guarantee
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

When to call us in Seahouses

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.

You may need us if you’ve spotted any of these:

  • Damage done while the bathroom was being fitted
  • A chip where the taps sit
  • Rust spots around the plughole
  • Impact holes in acrylic

Before booking anyone

  • Aftercare advice
  • Whether the price is fixed and includes VAT
  • What protection goes down before work starts
  • How long the guarantee is and what it covers

How to compare quotes

What happens on the day

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Keep a parking space free if you can
  • Move bottles, mats and clutter away from the area
  • Open a window if you can

Get a quote

Most customers in Seahouses get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a free quote

Related advice

Seahouses questions

Can you redo an old repair?

Yes. We remove the old filler and start again. Mention it when you send pictures.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Send pictures of everything together and we will quote them together.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Can rust on a bath be repaired?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Is there a call-out fee?

We do not add a call-out fee. Your fixed price includes everything.

Can I get a quote without a visit?

In nearly every case. If pictures do not show enough, we’ll ask for another angle.

Seahouses and the surrounding area

Seahouses is about 19 miles south-east of Berwick-upon-Tweed, in Northumberland. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Seahouses is one of 189 places in Northumberland where we work. Our jobs stretch from Seahouses to Newcastle upon Tyne (41 miles away).

Postcode districts we cover here: NE68. Jobs here include addresses on Main Street, Dunstan View and Mayfield and the roads around them. We also cover the places around Seahouses: North Sunderland (1 mile south-west), Beadnell (2 miles south-east), Benthall (2 miles south-east), High Newton-by-the-Sea (4 miles south) and Low Newton-by-the-Sea (5 miles south). Further out, we also cover Alnwick (12 miles south), Wooler (14 miles west), Belford (7 miles west), Longhoughton (10 miles south) and Shilbottle (15 miles south).

Local landmarks in Seahouses

We visit homes around Schooner Inn, Church of St Paul and Seahouses Primary School, among other places. Seahouses’s nearest station is Chathill station, about 3.7 miles south-west of the centre. A little further out are Bamburgh Castle (3 miles north-west) and Bamburgh Castle Aviation Artefacts Museum (3 miles north-west). For a walk, there’s Brada Hill.

Map of Seahouses © OpenStreetMap contributors

Prices and what affects them

Prices start from £95. A fixed quote means you know the cost before booking. We take into account:

  • The material
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes

We charge the same wherever you are, with no extra for Seahouses. What changes the price is the job itself: the material, the amount of damage and how many items.

Getting a price from pictures

Photographing the damage takes a minute, and it saves a visit. Please include:

  • Any earlier repairs or coatings
  • The material, if you know it
  • A picture taken from further back
  • A clear, close picture of the problem area

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.

When we would advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • A bath that moves underfoot, until its support is fixed
  • Metal that has corroded all the way through
  • Water coming from the waste or taps rather than the bath

Send us photos and we will tell you honestly.

Surfaces we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel

Work for landlords and builders

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Store metal items away from the bath
  • Keep abrasive pads and gritty cleaners away from the bath
  • Clean with warm water and a mild detergent
  • Put a towel in the bath if you are working above it

There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners and rinse after use.

Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

Repair or replace: which is better?

Many people think a damaged bath means a new one. Usually it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Rooms protected and left tidy
  • No extra charge for your area
  • Colours mixed by hand to suit your surface
  • No need to remove anything

Read our pricing or resurfacing vs replacement cost guide.

What your bath is made of matters

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.