Northumberland · England
Bath Repair in Wooler
Bath repair for Wooler, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
Bath repair in Wooler, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include a kit repair that didn’t last and chips on the rim or sides, across acrylic, whirlpool & spa baths and roll-top & freestanding.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Wooler (NE71)
- County
- Northumberland
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Landlords, letting agents and housing providers in Wooler use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
How the visit works
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Clear the area around the damage
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Also near Wooler
Other services in Wooler
What affects the price in Wooler
Repairs from £95. We don’t charge extra for travel to Wooler. The price comes down to:
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Whether old repairs or coatings need taking off
We charge the same wherever you are, so there is no premium for Wooler. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
- A close-up of the damage, in focus
Email us pictures of the damage and one of the whole item, with your NE71 postcode, and we’ll reply with a fixed quote.
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- We come to you, anywhere in the UK
- Normally one visit, start to finish
- Free fixed quotes from pictures
- Rooms protected and left tidy
Read our prices page and guide to resurfacing and replacement costs.
When to call us in Wooler
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.
Signs it’s time to call us include:
- Chips under the taps
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
- Deep scratches in acrylic
Comparing quotes
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- Aftercare advice
- What prep work is covered
Wooler: your questions answered
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Honest limits
Some jobs are not right for a repair, including:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Our work in Wooler
Wooler is about 15 miles south of Berwick-upon-Tweed, in Northumberland. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. We cover all 189 towns and villages across Northumberland, from the larger towns to small villages. Our jobs stretch from Wooler to Newcastle upon Tyne (about 41 miles away).
Here we cover the NE71 postcode area. Whether you live on High Street, Market Place and Station Road or a nearby road, a technician can come to you. Main roads around Wooler include the A697 and B6348, so getting to you is simple. We also travel to Akeld (2 miles north-west), Doddington (3 miles north), Chatton (4 miles east), Milfield (5 miles north-west) and Roddam (5 miles south). Within a short drive, we also cover Berwick-upon-Tweed (15 miles north), Alnwick (15 miles south-east), Coldstream (12 miles north-west), Seahouses (14 miles east), East Ord (14 miles north) and Spittal (14 miles north).
Local landmarks in Wooler
In Wooler, that means homes near The Black Bull pub, Church of St Mary and Wooler First School, among other places. Further afield, we also cover the area around Cheviot Museum And Field Centre (less than half a mile south-west) and Wooler Castle (less than half a mile south-east). Green spaces nearby include White Law.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
