North Yorkshire · England
Bath chip & crack repair in Seamer, North Yorkshire
Bath repair in and around Seamer: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Holes from dropped items
- Damage beneath the taps
How we handle bath repair in Seamer
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. If you’re dealing with a chipped rim or side and rusty patches near the plughole, we can usually put it right, whatever the material.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Where
- Seamer (TS9)
- Area hub
- North Yorkshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Seamer: your questions answered
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can you repair a hole in a bath?
In most cases. Send us a photo of the hole and one from under the bath if you can.
How much does bath repair cost in Seamer?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Do you cover Seamer?
Yes. We cover the entire UK and come to Seamer and the rest of North Yorkshire. Send us photos for a fixed quote, or call 0345 017 0787.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Looking after it afterwards
Once the work has cured, treat it gently:
- Make sure an acrylic bath is firm underfoot
- Avoid scourers, wire wool and gritty cream cleaners
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
A repaired bath needs no special treatment. Skip bleach and gritty creams.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in North Yorkshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For anyone letting property in or around Seamer, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Where we work around Seamer
Seamer is about 3 miles south of Brookfield, in North Yorkshire. Across the TS9 area, we carry out the work at your property. Seamer is one of 626 places in North Yorkshire where we work. You can also see our page for Newcastle upon Tyne, about 38 miles away.
Postcode districts we cover here: TS9. From Holme Lane, Hilton Road and Tanton Road or anywhere nearby, we can come to you. Nearby, we also work in Tame Bridge (1 mile south-east), Hilton (2 miles west), Rudby (3 miles south-west), Hutton Rudby (3 miles south-west) and Carlton in Cleveland (4 miles south). Within a short drive, we also cover Northallerton (13 miles south-west), Great Ayton (4 miles east), Romanby (14 miles south-west) and Brompton (12 miles south-west).
Near you in Seamer
In Seamer, that means homes near Stokesley School and Church of St Martin. The nearest railway station is Nunthorpe station, about 3.9 miles north-east. A little further out are James Cook University Hospital (4.7 miles north) and Newham Grange Farm Museum (3.2 miles north).
Why repair rather than replace?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there’s no premium for Seamer. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
- One-year guarantee on every repair
Take a look at our full price list or bath cost comparison.
Places near Seamer
Other services in Seamer
Honest limits
In fairness, there are a few things a repair won’t fix:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Signs you need bath repair in Seamer
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
These are the problems we’re asked about most:
- Holes from dropped items
- An old repair that has yellowed or come loose
- Snagging damage from a refit
- A chip where the taps sit
Comparing quotes
- What prep work is covered
- Whether a trained technician does the job
- How the room is protected while they work
- How soon you can use it again
How it works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will say immediately if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
