North Yorkshire · England
Bath chip & crack repair in Tame Bridge, North Yorkshire
Fixed-price bath repair in Tame Bridge and the surrounding area, generally in one visit and guaranteed for a year.
- Repairs from £95
- A chip where the taps sit
- A cracked acrylic bath
Repair or replace in Tame Bridge?
Replacing a fitted bath normally means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in a single visit. Prices start from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- One price list for the whole UK
- Dust sheets down, tidy finish
See our full price list or resurfacing vs replacement cost guide.
About our bath repair in Tame Bridge
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. If you’re dealing with impact holes in acrylic and scuffs and scratches in the surface, we can help, on acrylic, roll-top & freestanding and cast iron enamel alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Tame Bridge (TS9)
- County
- North Yorkshire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Questions from Tame Bridge
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Which areas do you work in?
Across the UK. Prices don’t change with location.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
What we cannot put right
A repair is not always the answer, and we would rather say so up front. We can’t fix:
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
If in doubt, send photos and we’ll say what we think.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a morning or an afternoon, including clearing up.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
- Tell us about parking, stairs or access
Get a quote
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Advice
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Rinse the bath after use, especially in hard water areas
- Check that an acrylic bath does not move when you stand in it
- Keep metal cans and razors off the surface
- Avoid scourers, wire wool and gritty cream cleaners
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Landlord and trade work in Tame Bridge
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Housing associations and facilities teams use us for planned and reactive repairs in North Yorkshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Tame Bridge and the surrounding area
Tame Bridge is about 5 miles south-east of Ingleby Barwick, in North Yorkshire. From the centre of Tame Bridge to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Tame Bridge is one of 626 towns and villages in North Yorkshire we cover. Our jobs stretch from Tame Bridge to Newcastle upon Tyne (about 40 miles away).
All of TS9 is covered. Nearby, we also work in Seamer (1 mile north-west), Rudby (3 miles west), Carlton in Cleveland (3 miles south), Hutton Rudby (3 miles south-west) and Faceby (3 miles south). Within a short drive, we also cover Northallerton (12 miles south-west), Great Ayton (4 miles north-east), Romanby (13 miles south-west) and Brompton (11 miles south-west).
Near you in Tame Bridge
In Tame Bridge, that means homes near The Queen's Head Public House, Stokesley Primary Academy and Church of St Peter and St Paul and the streets around them. The closest station to Tame Bridge is Great Ayton station, about 4.3 miles east of the centre. Nearby you will also find Castle Hill (1.1 miles east) and Captain Cook's Schoolroom (3.6 miles north-east). Not far away are Cringle Moor.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Do you need bath repair in Tame Bridge?
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
You may need us if you’ve spotted any of these:
- Snagging damage from a refit
- A cracked acrylic bath
- An old repair that has yellowed or come loose
- Chips on the rim or sides
What to look for in a quote
- How the room is protected while they work
- Who turns up on the day
- A fixed price, and whether VAT is included
- When it can be used again
Places near Tame Bridge
More services for Tame Bridge
About our accreditations · Every repair comes with a one-year guarantee.
