Somerset · England

Bath chip & crack repair in Seavington St Michael, Somerset

Bath repair in and around Seavington St Michael: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • A failed DIY repair that is discoloured or lifting
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Seavington St Michael

Bath repair in Seavington St Michael, done in place

Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair cast iron enamel, roll-top & freestanding and pressed steel enamel, and common reasons people get in touch are holes from dropped items and scuffs and scratches in the surface.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Area
Seavington St Michael (TA19)
County
Somerset
Cover
A year, on every repair
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Seavington St Michael and the surrounding area

Seavington St Michael is about 6 miles north-east of Chard, in Somerset. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Seavington St Michael is one of 640 places in Somerset we cover.

All of TA19 is within our area. From New Road, Water Street and School Lane or a nearby road, we can come to you. Neighbouring places we cover include Seavington St Mary (1 mile south-west), Broomhill (1 mile east), Lopen (1 mile south-east), Shepton Beauchamp (1 mile north) and Dinnington (2 miles south). Within a short drive, we also cover Taunton (13 miles north-west), Bridgwater (15 miles north-west), Yeovil (9 miles east), Chard (6 miles south-west), Street (14 miles north) and Crewkerne (4 miles south-east).

Landmarks near Seavington St Michael

Around Seavington St Michael, we work in homes near Church of St Michael and The Volunteer pub and the streets around them. The nearest railway station is Crewkerne station, roughly 5 miles south-east of the centre. A little further out are Crewkerne Community Hospital (4.1 miles south-east) and Crewkerne Castle (2.9 miles south). Open spaces near Seavington St Michael include Ham Hill.

Map of Seavington St Michael © OpenStreetMap contributors

Work for landlords and builders

If you manage property in Seavington St Michael, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.

Landlords, letting agents and housing providers in Seavington St Michael use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

What we do, step by step

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We clean up when we are done and let you know when you can use it again.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, generally by the day after, the bath is ready to use.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Have somewhere for us to park nearby if possible
  • Avoid using the area for a few hours before we arrive

How to get a price

If you are in Seavington St Michael and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Send photos for a quote

Advice

Your questions about bath repair in Seavington St Michael

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Can you repair several things at once?

Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.

What happens after I send photos?

We review the pictures and send a fixed quote and the next dates we have.

Can you quote from photos?

In nearly every case. If pictures do not show enough, we’ll ask for another angle.

What about rust by the waste?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Can you repair something that is been repaired before?

In most cases. The old repair comes out first, so mention it when you send pictures.

I tried a repair kit. Can you fix it?

Yes. We remove the old filler and start again. Mention it when you send pictures.

Do you cover Seavington St Michael?

Yes. We cover the entire UK and travel to Seavington St Michael and the rest of Somerset. Send us pictures for a fixed quote, or call 0345 017 0787.

When we would advise against a repair

It helps to know what we cannot do:

  • A bath that moves underfoot, until its support is fixed
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Rust that has eaten right through a steel bath

If in doubt, send photos and we’ll say what we think before you book.

Materials we work on in Seavington St Michael

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel

Why repair rather than replace?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Seavington St Michael. The job itself decides the price: how much damage, what it’s made of and how many items.

Why us?

  • One visit for most repairs
  • CHAS, Constructionline and SafeContractor accredited
  • No need to remove anything
  • A fixed quote before you book

See our full price list or bath cost comparison.

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Rinse it down after each bath
  • Keep metal cans and razors off the surface
  • Don’t leave a fresh chip for long
  • Put a towel in the bath if you are working above it

Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

Signs you need bath repair in Seavington St Michael

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.

The most common problems we are called about are:

  • Deep scratches in acrylic
  • Hairline or through cracks in acrylic
  • Chips along the edge of the bath
  • A failed DIY repair that’s discoloured or lifting

What to look for in a quote

  • How to look after the finish
  • Whether the price is fixed and includes VAT
  • Whether there are any call-out or travel charges
  • The length of the guarantee and what it covers

10 questions to ask before booking

What bath repair costs

Repairs from £95. There is no area surcharge for Seavington St Michael. The price reflects:

  • Doing more than one item at once
  • The material and finish
  • Previous DIY repairs that have to come out
  • How much damage there is

Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

How to get a fixed price

Photographing the damage takes a minute. Try to send:

  • Whether it’s been repaired or coated before
  • A photo taken from further back
  • Your postcode, so we can check dates
  • The material, if you know it

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.