Somerset · England
Bath chip & crack repair in Dinnington, Somerset
Bath repair in and around Dinnington: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips caused by builders
- Impact holes in acrylic
Signs you need bath repair in Dinnington
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Common reasons people in Dinnington contact us include:
- A chipped rim or side
- Rust spots around the plughole
- Cracks in an acrylic bath
- A chip where the taps sit
Comparing quotes
- What prep work is covered
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the photos show
- How to care for the finish
How we handle bath repair in Dinnington
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We regularly repair roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and common reasons people get in touch are chips along the edge of the bath and a hole punched through by something heavy.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Dinnington (TA17)
- Area hub
- Somerset
- Cover
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Honest limits
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Also near Dinnington
More services for Dinnington
How to look after the repair
So the finish stays in good condition for years:
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath doesn’t move when you stand in it
- Cover the bath during DIY or decorating
- Have new chips seen to early
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Dinnington and the surrounding area
Dinnington is about 5 miles north-east of Chard, in Somerset. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. We work in all 640 towns and villages in Somerset, from the larger towns to small villages.
We cover every part of TA17 and the streets around it. If you’re just outside Dinnington, we cover Hinton St George (1 mile east), Seavington St Mary (1 mile north), Seavington St Michael (2 miles north), Dowlish Wake (2 miles west) and Lopen (2 miles north-east). Within a short drive, we also cover Taunton (13 miles north-west), Yeovil (9 miles east), Chard (5 miles south-west), Street (15 miles north), Crewkerne (3 miles south-east) and Somerton (11 miles north-east).
Near you in Dinnington
Our clients here include homes close to Hinton St George Church of England School, Rose and Crown Inn and Church of St Nicholas and the streets around them. The closest station to Dinnington is Crewkerne station, about 4.1 miles south-east of the centre. A little further out are Crewkerne Community Hospital (3.1 miles south-east) and Crewkerne Castle (1.7 miles south-east).
How we price bath repair
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Unusual colours or finishes
- Where the damage is and how we get to it
- How much damage there is
- Previous DIY repairs that have to come out
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- The material, if you know it
- The postcode, so we can plan the visit
- A picture taken from further back
Send us a photo of the damage and a wider shot of the entire item, and tell us you’re in Dinnington, and we’ll reply with a fixed quote.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Have a window or extractor fan available
- Point us to the nearest place to park
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Advice
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Repair or replace: which is better?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Dinnington
- Same prices wherever you are
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
Read our prices page and resurfacing vs replacement cost guide.
Your questions about bath repair in Dinnington
Can you quote from photos?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can you repair a hole in a bath?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When can I have a bath again?
Normally by the following day, though it depends on what we have done.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
About our accreditations · Every repair comes with a one-year guarantee.
