Wiltshire · England
Bath chip & crack repair in Serrington, Wiltshire
Bath repair in and around Serrington: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips caused by builders
- An old repair that has yellowed or come loose
How the visit works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the following day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
How we handle bath repair in Serrington
A typical bath repair is a few hours’ work, and you can usually bathe again the following day. There is no need to book a plumber or tiler, because nothing is disconnected. Common call-outs are for rusty patches near the plughole and holes from dropped items, across cast iron enamel, acrylic and roll-top & freestanding.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Serrington (SP3)
- Area hub
- Wiltshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Serrington
Serrington is about 6 miles north-west of Salisbury, in Wiltshire. We visit customers in Serrington, so you don’t need to take anything anywhere. Our technicians cover 425 places in Wiltshire.
All of SP3 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Steeple Langford (2 miles west), Hanging Langford (2 miles west), Wylye (4 miles west), Deptford (4 miles west) and Maddington (4 miles north). Larger places within reach include Salisbury (6 miles south-east), Westbury (15 miles north-west), Warminster (13 miles west), Amesbury (6 miles north-east), Bugmore (7 miles south-east) and Milford (7 miles south-east).
Around Serrington
Typical jobs here are in homes near Church of St Mary, among other places. Further afield, we also cover the area around Stapleford Castle (0.5 miles north). For a walk, there’s Baverstock Juniper Bank.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Common problems we fix in Serrington
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
It’s worth getting a quote if you see:
- Chips along the edge of the bath
- Rust spots around the plughole
- Chips caused by builders
- Impact holes in acrylic
Questions to ask before you book
- How long it needs to cure
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
- How the colour is matched
Questions from Serrington
Do you cover the entire of Wiltshire?
The whole UK, including all of Wiltshire. Send your postcode with your pictures and we will confirm dates.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
I tried a repair kit. Can you fix it?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- Cracks in acrylic we cannot reach from underneath
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
- No need to remove anything
Take a look at our prices page and guide to resurfacing and replacement costs.
Nearby places to Serrington
Also in Serrington
Landlord and trade work in Serrington
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Prices and what affects them
Prices start from £95. You won’t pay by the hour. The price depends on:
- How many areas need work
- How hard the colour is to match
- What kind of damage it is
- How many items we do on one visit
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Something in shot to show the size
- One picture of the entire bath
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
Upload pictures of the damage and a wider shot of the entire item, and tell us you are in Serrington, and we’ll come back with a fixed quote.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
