Argyll and Bute · Scotland
Bath chip & crack repair in Shandon, Argyll and Bute
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Shandon and across Argyll and Bute. Send photos for a free, fixed quote.
- Repairs from £95
- A cracked acrylic bath
- Impact holes in acrylic
About our bath repair in Shandon
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. Common call-outs are for a chip where the taps sit and rusty patches near the plughole, on cast iron enamel, whirlpool & spa baths and pressed steel enamel.
Big or small, it’s backed by a one-year guarantee in Shandon and across Argyll and Bute.
- Where
- Shandon (G84)
- Region
- Argyll and Bute
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
What else we do in Shandon
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Shandon
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Looking after it afterwards
Once the work has cured, treat it gently:
- Fix dripping taps early to stop staining and limescale
- Do not leave a fresh chip for long
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Why repair rather than replace?
A new bath brings a chain of other jobs: tiles along the rim usually crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. You’ll see the full price before booking.
What you get with us
- A fixed quote before you book
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- We leave the room as we found it
Take a look at our prices page and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Landlords, agents and businesses in Shandon
We are used to working with agents and managing companies. Send the address, photos and access details.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Where we work around Shandon
Shandon is about 3 miles north-west of Helensburgh, in Argyll and Bute. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Shandon is one of 118 places in Argyll and Bute where we work. Our jobs stretch from Shandon to Glasgow (about 24 miles away).
Jobs in G84 are booked in the same way as anywhere else. Whether you live on Station Road, Gareloch Brae and Kings Point or anywhere nearby, a technician can come to you. Nearby, we also work in Clynder (1 mile south-west), Rhu (1 mile south-east), Rahane (2 miles north-west), Rosneath (2 miles south) and Mambeg (3 miles north-west). Within a short drive, we also cover Helensburgh (3 miles south-east), Dunoon (8 miles south-west), Garelochhead (4 miles north), Sandbank (7 miles south-west) and Innellan (12 miles south-west).
Local landmarks in Shandon
Around Shandon, we work in homes near Parish Church. The nearest railway station is Helensburgh Upper station, about 3 miles south-east. Further afield, we also cover the area around Scottish Submarine Centre (3.2 miles south-east) and Victoria Infirmary (3.9 miles south-east).
Shandon: your questions answered
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Do you cover Shandon?
Yes. We cover the whole UK and come to Shandon. Send us photos for a fixed quote, or call 0345 017 0787.
When can I have a bath again?
Most baths can be used the next day. We’ll tell you the exact curing time when we finish.
How do I get a price for bath repair in Shandon?
Prices start from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your G84 postcode.
When to call us in Shandon
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Look out for these signs:
- Rust by the waste and overflow
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
Questions to ask before booking
- Who turns up on the day
- If travel is included in the price
- Whether the price is fixed and includes VAT
- What happens if they find more damage
About our accreditations · Every repair comes with a one-year guarantee.
