Norfolk · England

Bath chip & crack repair in Shepherds' Gate, Norfolk

Problem with your bath in Shepherds' Gate? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Chips caused by builders
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Shepherds' Gate

Bath repair in Shepherds' Gate, done in place

Most of our bath repairs take a few hours, and the bath is back in use the next day. You won’t need a plumber or tiler, because nothing is disconnected. We’re frequently asked to fix chips caused by builders and rusty patches near the plughole, on pressed steel enamel, acrylic and cast iron enamel.

You get a one-year guarantee, the same in Shepherds' Gate as everywhere else we work.

Before and after: a chipped, rust-stained bath around the plughole
Area
Shepherds' Gate (PE34)
Region
Norfolk
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

When a repair is not the answer

Honesty matters more than a booking, so here’s what a repair will not do:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Water coming from the waste or taps rather than the bath
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

About Shepherds' Gate

Shepherds' Gate is about 5 miles west of King's Lynn, in Norfolk. We visit clients in Shepherds' Gate, so nothing has to leave your home. Our repair technicians cover 797 places in Norfolk, from the larger towns to small villages.

We cover every part of PE34. You will find streets such as Greens Lane, Bullock Road and Shepherdsgate Road. We also cover the places around Shepherds' Gate: Tilney All Saints (1 mile east), Tilney High End (1 mile south-east), Clenchwarton (3 miles north-east), Wiggenhall St Germans (4 miles south-east) and West Lynn (4 miles east). We also work in nearby towns such as King's Lynn (5 miles east), Downham Market (10 miles south), Fairstead (6 miles east), Heacham (14 miles north-east), North Lynn (5 miles east) and Dersingham (11 miles north-east).

Near you in Shepherds' Gate

In Shepherds' Gate, that means homes near Tilney All Saints CofE Primary School, St Clement's High School and Church of All Saints. The closest station to Shepherds' Gate is Kings Lynn station, roughly 4.4 miles east. Well-known places in the area include Kings Lynn The Red Mount (4.5 miles east).

Map of Shepherds' Gate © OpenStreetMap contributors

Repairs by material

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Prices and what affects them

Repairs from £95. Each job gets its own fixed price. This is what makes a difference:

  • Previous DIY repairs that have to come out
  • How much damage there is
  • The material
  • Access to the area

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from photos

You can normally get a fixed quote without us visiting. To help us price it:

  • One sharp close-up of the damage
  • One picture of the entire bath
  • Where you are, by postcode
  • What it’s made of, if you know

Email us pictures of the damage and one of the whole item, with your PE34 postcode, and we will reply with a fixed price.

FAQs for Shepherds' Gate

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before and we’ll plan for it.

Is it worth repairing rather than replacing?

Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

When can I have a bath again?

Normally by the following day, depending on the repair.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Can you repair a crack in an acrylic bath?

Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.

Can pets and children be at home?

Just keep them out of the work area. We will tell you when the room can be used again.

Landlords, agents and businesses in Shepherds' Gate

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Common problems we fix in Shepherds' Gate

Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.

Get in touch if you’ve noticed:

  • Cracks in an acrylic bath
  • A chipped rim or side
  • Holes from dropped items
  • A kit repair that didn’t last

Before you book anyone

  • Aftercare advice
  • How the colour is matched
  • Whether cleaning and preparation are in the price
  • What happens if the damage is worse than the pictures show

Our hiring checklist

Looking after it afterwards

So the finish stays in good condition for years:

  • Have new chips seen to early
  • Rinse the bath after use, especially in hard water areas
  • Do not leave razors or cans standing in the bath
  • If an acrylic bath flexes, have its feet adjusted

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a few hours. We clean up when we’re done and tell you when it’s ready to use.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Keep children and pets away from the room on the day
  • Tell us about any previous repairs or coatings
  • Let us know about parking or access

How to get a price

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Send pictures for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.