Norfolk · England
Bath chip & crack repair in Tilney All Saints, Norfolk
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Tilney All Saints, with a one-year guarantee on every repair.
- Repairs from £95
- Snagging damage from a refit
- Rusty patches near the plughole
How we handle bath repair in Tilney All Saints
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We’re frequently asked to fix a failed DIY repair that’s discoloured or lifting and chips on the rim or sides, in whirlpool & spa baths, cast iron enamel and acrylic.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Tilney All Saints (PE34)
- County
- Norfolk
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- What the surface is made of
- The colour and finish to match
- Any earlier repairs that need removing first
- How much damage there is
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- A picture taken from further back
- Where you are, by postcode
Send us pictures of the damage and one of the entire item, and tell us you are in Tilney All Saints, and we’ll come back with a fixed quote.
Tilney All Saints: your questions answered
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we will plan for it.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Something went through my bath. Can it be fixed?
Typically. Send us a photo of the hole and one from under the bath if you can.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Our work in Tilney All Saints
Tilney All Saints is about 4 miles west of King's Lynn, in Norfolk. Across the PE34 area, we carry out the work at your property. Tilney All Saints is one of 797 places in Norfolk we cover.
Here we cover the PE34 postcode area. Jobs here include addresses on Church Road, Church Lane and Cotts Lane and the roads around them. We also travel to Tilney High End (1 mile south), Shepherds' Gate (1 mile west), Clenchwarton (2 miles north-east), Wiggenhall St Germans (3 miles south-east) and West Lynn (3 miles north-east). Larger places within reach include King's Lynn (4 miles east), Downham Market (9 miles south), Fairstead (5 miles east), Heacham (14 miles north-east), North Lynn (4 miles north-east) and Dersingham (11 miles north-east).
Local landmarks in Tilney All Saints
Our customers here include homes close to St Clement's High School, Church of All Saints and Tilney All Saints CofE Primary School and the streets around them. The nearest railway station is Kings Lynn station, about 3.7 miles east of the centre. A little further out are Queen Elizabeth Hospital (5.5 miles east) and Kings Lynn The Red Mount (3.8 miles east).
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we will tell you honestly.
Materials we work on in Tilney All Saints
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
Work for landlords and builders
If you manage property in Tilney All Saints, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
The process
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take a few hours, depending on the damage, including clearing up.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
Ask for a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- A fixed quote before you book
- We leave the room as we found it
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Take a look at our prices page or bath cost comparison.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Do you need bath repair in Tilney All Saints?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move.
Signs it’s time to call us include:
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
- Damage beneath the taps
Before you book anyone
- Whether they match the colour on site
- How the room is protected while they work
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
Places near Tilney All Saints
More services for Tilney All Saints
About our accreditations · Every repair comes with a one-year guarantee.
