Leeds · England
Bath Repair in Sherburn in Elmet
Fixed-price bath repair in Sherburn in Elmet and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- Rusty patches near the plughole
What we can’t put right
We’ll always be straight with you, so here’s what a repair cannot fix:
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Sherburn in Elmet
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
About our bath repair in Sherburn in Elmet
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. Common call-outs are for chips under the taps and scuffs and scratches in the surface, in whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Sherburn in Elmet (LS25)
- Region
- Leeds
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Sherburn in Elmet
Prices start from £95. We do not charge extra for travel to Sherburn in Elmet. The price depends on:
- The material and finish
- Previous DIY repairs that have to come out
- Doing more than one item at once
- Access to the area
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Keeping it looking good
It’s all simple stuff:
- Protect the bath with a towel when doing jobs nearby
- Stick to mild cleaners and a soft cloth
- Get a dripping tap fixed promptly
- Store metal items away from the bath
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Do you need bath repair in Sherburn in Elmet?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Signs it’s time to call us include:
- Rust by the waste and overflow
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
- A kit repair that didn’t last
What your quote should include
- How changes to the job are handled
- How the room is protected while they work
- Whether a trained technician does the job
- If travel is included in the price
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About Sherburn in Elmet
Sherburn in Elmet is about 7 miles north-east of Castleford, in Leeds. From the centre of Sherburn in Elmet to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 198 places in Leeds. We work right across the region, from Sherburn in Elmet to Leeds (about 12 miles away).
Jobs in LS25 work the same way as everywhere else we cover. That includes homes on Horsa Place, Pasture Court and Pasture Way and the roads around them. Nearby, we also work in South Milford (1 mile south), Newthorpe (2 miles south-west), Lumby (2 miles south), Monk Fryston (2 miles south) and Hillam (3 miles south). We also work in nearby towns such as Leeds (12 miles west), Morley (15 miles west), Rothwell (10 miles west), Beeston (13 miles west), Wetherby (11 miles north-west) and Woodhouse (13 miles west).
Around Sherburn in Elmet
We visit homes around Church of All Saints, Sherburn High School and Oddfellows Arms and the streets around them. The nearest railway station is Sherburn-In-Elmet station, about 0.5 miles east. Not far away are Fairburn Ings RSPB reserve.
Also near Sherburn in Elmet
Other services in Sherburn in Elmet
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Sherburn in Elmet questions
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can I add another job to the visit?
Of course, and it usually saves money. Just add the extra items to your photos and you’ll get one combined price.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Do you come to Sherburn in Elmet?
Yes. We cover the entire UK and travel to Sherburn in Elmet. Send pictures and we’ll quote, or call 0345 017 0787.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
The process
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a few hours. We leave the room clean.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the day after.
How to prepare
- Tell us if there are stairs or a lift
- Open a window if you can
- Tell us about any previous repairs or coatings
Getting a price
For a price in Sherburn in Elmet, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
