Warwickshire · England
Bath chip & crack repair in Shipston-on-Stour, Warwickshire
Bath repair in Shipston-on-Stour without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- Snagging damage from a refit
- Hairline or through cracks in acrylic
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Check that an acrylic bath does not move when you stand in it
- Get any new chip repaired before it rusts
- Stick to mild cleaners and a soft cloth
- Do not scrub with anything abrasive
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
About our bath repair in Shipston-on-Stour
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s cracks in an acrylic bath and scuffs and scratches in the surface, we can help.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- Shipston-on-Stour (CV36)
- Area hub
- Warwickshire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Shipston-on-Stour
Shipston-on-Stour is about 10 miles south of Stratford-upon-Avon, in Warwickshire. We travel to homes and businesses in Shipston-on-Stour, so nothing has to leave your home. Shipston-on-Stour is one of 324 towns and villages in Warwickshire where we work. We work right across the region, from Shipston-on-Stour to Birmingham (about 30 miles away).
Here we cover the CV36 postcode area. You’ll find streets such as High Street, Market Place and Station Road. Shipston-on-Stour sits on or near the A3400 and B4035, so getting to you is simple. If you are just outside Shipston-on-Stour, we cover Willington (1 mile south-east), Tidmington (1 mile south), Burmington (2 miles south), Blackwell (2 miles north-west) and Tredington (2 miles north). Within a short drive, we also cover Warwick (15 miles north), Stratford-upon-Avon (10 miles north), Alcester (15 miles north-west), Wellesbourne (9 miles north), Whitnash (15 miles north) and Middle Quinton (7 miles north-west).
Local landmarks in Shipston-on-Stour
Locally, our jobs take us to homes close to Shipston High School, Shipston-on-Stour Primary School and The White Bear Public House, among other places. Other landmarks nearby include Ellen Badger Hospital (under half a mile north-east). Not far away are Castle Hill.
Places near Shipston-on-Stour
What else we do in Shipston-on-Stour
FAQs for Shipston-on-Stour
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
How do I book?
Use the quote form or ring 0345 017 0787.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
How long before I can use the bath?
Generally within a day, depending on the repair.
Can you repair a hole in a bath?
Usually. Send us a photo of the hole and one from under the bath if you can.
What we can’t put right
We won’t take on work that will not last, so here’s what a repair can’t put right:
- A bath that moves underfoot, until its support is fixed
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Prices and what affects them
Repairs from £95. Each job gets its own fixed quote. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Unusual colours or finishes
- The material and finish
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
- One sharp close-up of the damage
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- No need to remove anything
- Straight answers about what a repair can do
- A year’s guarantee on all work
- We leave the room as we found it
Take a look at our pricing and guide to resurfacing and replacement costs.
Landlord and trade work in Shipston-on-Stour
For anyone letting property in or around Shipston-on-Stour, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Landlords, letting agents and housing providers in Shipston-on-Stour use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
The process
You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. It generally takes a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Ensure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Ensure the area is dry
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
