Warwickshire · England
Bath Repair in Wellesbourne
Local bath repair for Wellesbourne: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
About our bath repair in Wellesbourne
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. You can typically use the bath the following day. We work on pressed steel enamel, cast iron enamel and acrylic, and people most often call us about deep scratches in acrylic and a hole punched through by something heavy.
All our work is covered by a one-year guarantee.
- Where
- Wellesbourne (CV35)
- Region
- Warwickshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Wellesbourne
Will the repair show?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
What information do you need?
Use the quote form or ring 0345 017 0787.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Warwickshire.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Store metal items away from the bath
- Do not scrub with anything abrasive
- Rinse it down after each bath
- A dripping tap stains enamel, so fix it early
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
Landlord and trade work in Wellesbourne
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
How the visit works
We agree an arrival time beforehand. Once we’re there, the work takes a few hours, depending on the damage. The room is left tidy and you will know when it can be used.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the next day, the bath is ready to use.
How to prepare
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
Repair or replace in Wellesbourne?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why us?
- Work done at your home or business
- Rooms protected and left tidy
- Straight answers about what a repair can do
- Fixed prices from your photos
Take a look at our full price list and guide to resurfacing and replacement costs.
Signs you need bath repair in Wellesbourne
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Typical reasons for a call-out include:
- A chip where the taps sit
- Deep scratches in acrylic
- A failed DIY repair that is discoloured or lifting
- Cracks in an acrylic bath
Before you book anyone
- What aftercare is recommended
- Who turns up on the day
- What prep work is covered
- What the guarantee covers, and for how long
How we price bath repair
Prices start from £95. We don’t charge extra for travel to Wellesbourne. The price depends on:
- How easy the damage is to reach
- How much damage there is
- The material
- Whether it’s a chip, crack, burn or wear
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Cracks in acrylic we can’t reach from underneath
- Metal that has corroded all the way through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send pictures and we’ll say what we think.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Covering Wellesbourne
Wellesbourne is about 5 miles east of Stratford-upon-Avon, in Warwickshire. Whether you are in the middle of Wellesbourne or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Wellesbourne is one of 324 towns and villages in Warwickshire we cover. Our jobs stretch from Wellesbourne to Birmingham (about 23 miles away).
Our visits in CV35 are booked in the same way as anywhere else. Streets in the area include Chestnut Square, Grantham Road and Chedham Road. We also cover the places around Wellesbourne: Walton (1 mile south-east), Compton Verney (2 miles south-east), Combrook (3 miles south-east), Butlers Marston (4 miles south-east) and Lighthorne (4 miles east). Further out, we also cover Warwick (6 miles north), Royal Leamington Spa (8 miles north), Stratford-upon-Avon (5 miles west), Leamington Spa (8 miles north), Kenilworth (11 miles north) and Southam (10 miles north-east).
What’s near Wellesbourne
Locally, our jobs take us to homes close to Church of St Peter, Kings Head Public House and Wellesbourne CofE Primary School. Well-known places in the area include Chedham's Yard (within half a mile north-east) and Duke of Bedford's Castle (3.9 miles north-west).
Nearby places to Wellesbourne
Also in Wellesbourne
About our accreditations · Every repair comes with a one-year guarantee.
