Lancashire · England
Bath chip & crack repair in Singleton, Lancashire
Problem with your bath in Singleton? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- A hole punched through by something heavy
- Chips caused by builders
The process
Your technician turns up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes two to three hours for most chips, and we leave the room as we found it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the following day.
Getting ready for the visit
- Let us know if it has been repaired before
- Open a window if you can
- Let us know which floor the room is on
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
How we handle bath repair in Singleton
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Typical jobs include impact holes in acrylic and chips under the taps, on cast iron enamel, acrylic and whirlpool & spa baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Singleton (FY6)
- Region
- Lancashire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Singleton and nearby
Singleton is about 2 miles east of Poulton-le-Fylde, in Lancashire. Whether you are in the middle of Singleton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Singleton is one of 482 places in Lancashire where we work. Our jobs stretch from Singleton to Liverpool (30 miles away).
Here we cover the FY6 postcode area. Streets in the area include Church Road, Station Road and Grange Road, and we cover them all. Other places close to Singleton include Little Singleton (1 mile north-west), Thistleton (1 mile east), Weeton (2 miles south), Larbreck (2 miles north-east) and Greenhalgh (2 miles south-east). Within a short drive, we also cover Preston (11 miles south-east), Lytham St Anne's (7 miles south-west), Bamber Bridge (13 miles south-east), Leyland (14 miles south-east), Fulwood (10 miles south-east) and Fleetwood (7 miles north-west).
Near you in Singleton
Typical jobs here are in homes near Singleton Church of England Voluntary Aided Primary School, Hodgson Academy and St Anne's Church and the streets around them. For rail, the closest station is Poulton-Le-Fylde station, about 2.3 miles west of the centre. Other landmarks nearby include Blackpool Victoria Hospital (3.5 miles west) and Teanlowe Centre (2.4 miles west). Open spaces near Singleton include Marton Mere.
Nearby places to Singleton
What else we do in Singleton
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. Our prices are the same across the UK, so there’s no premium for Singleton. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
- Dust sheets down, tidy finish
- No need to remove anything
Read our prices page and bath cost comparison.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- If an acrylic bath flexes, have its feet adjusted
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
- Do not scrub with anything abrasive
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Landlords, agents and businesses in Singleton
We work for landlords, letting agents and housing providers in Singleton as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Singleton
Repairs from £95. We do not charge extra for travel to Singleton. The price comes down to:
- The type of damage
- Whether old repairs or coatings need taking off
- How much damage there is
- How hard the colour is to match
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed quote
You can normally get a fixed price without us visiting. To make it quick:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- Any earlier repairs or coatings
- A picture taken from further back
To get a price, send two or three photos through our quote form or ring us. We will say right away if a repair is the right fix.
Honest limits
A few problems are outside what a surface repair can do:
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Common questions in Singleton
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What areas do you cover?
Across the UK, so Singleton is covered. Our prices are the same everywhere.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Common problems we fix in Singleton
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
Send us a photo if you notice any of these:
- Deep scratches in acrylic
- A cracked acrylic bath
- Impact holes in acrylic
- Chips caused by builders
What your quote should include
- Is the price fixed, and does it include VAT?
- How to care for the finish
- What preparation is included
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
