Lancashire · England
Bath re-enamelling & resurfacing in Singleton, Lancashire
Bath re-enamelling across Singleton and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Bath re-enamelling in Singleton, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you are dealing with a roll-top that’s seen better days and a peeling or bubbling previous coating, we can generally put it right, whatever the material.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Area
- Singleton (FY6)
- Area hub
- Lancashire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Singleton
Singleton is about 2 miles east of Poulton-le-Fylde, in Lancashire. We travel to clients in Singleton and the surrounding area, so there is no workshop to go to. Singleton is one of 482 towns and villages in Lancashire we cover. Our jobs stretch from Singleton to Liverpool (30 miles away).
Our repair technicians cover all of the FY6 postcode area and the streets around it. Local streets include Church Road, Station Road and Grange Road, all of which we cover. Close by, we cover Little Singleton (1 mile north-west), Thistleton (1 mile east), Weeton (2 miles south), Larbreck (2 miles north-east) and Greenhalgh (2 miles south-east). Within a short drive, we also cover Preston (11 miles south-east), Lytham St Anne's (7 miles south-west), Bamber Bridge (13 miles south-east), Leyland (14 miles south-east), Fulwood (10 miles south-east) and Fleetwood (7 miles north-west).
Near you in Singleton
In Singleton, that means homes near Singleton Church of England Voluntary Aided Primary School, Hodgson Academy and St Anne's Church. Singleton’s nearest station is Poulton-Le-Fylde station, about 2.3 miles west of the centre. Further afield, we also cover the area around Blackpool Victoria Hospital (3.5 miles west) and Teanlowe Centre (2.4 miles west). Open spaces near Singleton include Marton Mere.
How the visit works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a full day in most cases. The room is left tidy and you’ll know when it can be used.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Let us know which floor the room is on
- Open a window if you can
- Let us know about parking or access
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Read more
Common problems we fix in Singleton
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is usually perfectly sound.
Keep an eye out for any of the following:
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- What aftercare is recommended
- How the colour is matched
- What preparation is included
- Is the price fixed, and does it include VAT?
When a repair is not the answer
We’d rather lose a job than do one that will not last, so these are the limits:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Singleton
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
What affects the price in Singleton
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Unusual colours or finishes
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Phone pictures are fine, there’s no need for anything special. Ensure they show:
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- The material, if you know it
- Your postcode, so we can check dates
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Places near Singleton
Also in Singleton
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
Housing associations and facilities teams use us for planned and reactive repairs in Lancashire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Repairing versus replacing in Singleton
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- No need to remove anything
- Colours mixed by hand to suit your surface
- Every repair guaranteed for a year
- Straight answers about what a repair can do
Read our prices page or bath cost comparison.
Singleton questions
How do I get a price for bath re-enamelling in Singleton?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item with your FY6 postcode.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
It’s been repaired before. Can you still fix it?
Generally, yes. The old repair comes out first.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
About our accreditations · Every repair comes with a one-year guarantee.
