Orkney Islands · Scotland

Bath Repair in Skeabrae

Bath repair in Skeabrae without the cost of replacing. Send us pictures for a fixed price, then book a visit.

  • Repairs from £95
  • Chips along the edge of the bath
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Skeabrae

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Bath repair in Skeabrae without replacing anything

A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. You can typically use the bath the following day. We work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and people most frequently call us about chips caused by builders and hairline or through cracks in acrylic.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Rusty chip next to a bath plughole, before and after repair
Area
Skeabrae (KW17)
Region
Orkney Islands
Cover
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

How it works

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a few hours. We tidy up before we leave and let you know when you can use it again.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, normally the following day.

How to prepare

  • Point us to the nearest place to park
  • Have a window or extractor fan available
  • Mention any earlier repairs or resurfacing

Getting a price

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.

Get a fixed quote

Related advice

What affects the price in Skeabrae

Prices start from £95. We charge the same across the UK, including Skeabrae. The price reflects:

  • How easy the damage is to reach
  • What kind of damage it is
  • How hard the colour is to match
  • The size and number of damaged areas

A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Getting a price from photos

The better the photos, the more accurate the price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates
  • One picture of the entire bath
  • Details of any past repairs

Most customers in Skeabrae get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Covering Skeabrae

Skeabrae is about 13 miles north-west of Kirkwall, in the Orkney Islands. We travel to homes and businesses in Skeabrae and nearby villages, so there is no workshop to go to. Our technicians cover 51 places across the Orkney Islands.

All of KW17 is within our area. We also cover the places around Skeabrae: Dounby (1 mile east), Hourston (2 miles south-east), Scarwell (2 miles west), Russland (3 miles south-east) and Tenston (3 miles south). If you are somewhere remote, call first so we can plan the visit.

Near you in Skeabrae

A little further out are Earl's Palace (4.6 miles north-west) and Kirbuster Farm Museum (2.8 miles north). Not far away are Orr Shun and Greeny Hill.

Map of Skeabrae © OpenStreetMap contributors

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Do not leave razors or cans standing in the bath
  • Don’t leave a fresh chip for long
  • Clean with warm water and a mild detergent
  • Make sure an acrylic bath is firm underfoot

Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.

Should you replace it?

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.

Why choose Surface Doctor in Skeabrae

  • One price list for the entire UK
  • Fixed prices from your photos
  • Work done at your home or business
  • Generally one visit, start to finish

Take a look at our full price list and resurfacing vs replacement cost guide.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Landlord and trade work in Skeabrae

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Questions from Skeabrae

Do you repair coloured baths?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Is there any odour?

It depends on the job, but often a little. Ventilation keeps it to a minimum.

What about rust by the waste?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

Can you repair a failed DIY repair?

Regularly. We strip it out, deal with any rust and repair it again.

What happens after I send pictures?

You will get a fixed quote back, usually with dates to choose from. There is no obligation to book.

Do you charge for travel?

We do not add a call-out fee. Your fixed price includes everything.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

How invisible is a bath repair?

On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.

What we are called out for in Skeabrae

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.

The things customers generally mention when they call are:

  • Hairline or through cracks in acrylic
  • A chipped rim or side
  • Rust by the waste and overflow
  • Holes from dropped items

Questions to ask before booking

  • Aftercare advice
  • How long it needs to cure
  • How the colour is matched
  • What preparation is included

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.