Highland · Scotland
Bath Repair in Camore
Bath repair in Camore without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Scratches you can feel with a fingernail
- A chipped rim or side
What we do, step by step
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a few hours, depending on the damage. Before we go, we will explain how long to leave it and how to care for it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Advice
Bath repair in Camore, done in place
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. Whether it’s a hole punched through by something heavy and a failed DIY repair that’s discoloured or lifting, we can help, whatever the material.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Camore (IV25)
- County
- Highland
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why Camore customers choose us
- Fixed prices from your photos
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- Straight answers about what a repair can do
Read our pricing and resurfacing vs replacement cost guide.
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Our work in Camore
Camore is about 22 miles north of Nairn, in Highland. Whether you are in the middle of Camore or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 253 places across Highland.
Postcode districts we cover here: IV25. Streets in the area include Camore Crescent and Camore Gardens, all of which we cover. If you are just outside Camore, we cover Dornoch (1 mile east), Hilton (2 miles north-east), Skelbo Muir (3 miles north), Embo (3 miles north-east) and Littleferry (4 miles north-east). We also work in nearby towns such as Tain (5 miles south), Alness (15 miles south-west), Invergordon (14 miles south), Golspie (7 miles north-east), Brora (12 miles north-east) and Cromarty (14 miles south). If you are somewhere remote, ring us first and we’ll plan the trip.
Around Camore
Typical jobs here are in homes near Evelix, Dornoch Academy and Pilgudy Holiday Park. The closest station to Camore is Tain station, about 4.9 miles south of the centre. Nearby you will also find Dornoch Castle (1.3 miles east) and Historylinks Museum (1.3 miles east). Not far away are Loch Lànnsaidh and Loch Fleet National Nature Reserve.
What affects the price in Camore
Repairs from £95. Prices are worked out job by job, from your pictures. What matters most is:
- What kind of damage it is
- What the surface is made of
- Access to the area
- Any earlier repairs that need removing first
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
It only takes a minute to photograph the damage. Please include:
- A wider photo showing the entire bath
- Details of any past repairs
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
- Check that an acrylic bath doesn’t move when you stand in it
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
FAQs for Camore
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
How much does bath repair cost in Camore?
Prices start from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Towns and villages near Camore
More services for Camore
Do you need bath repair in Camore?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
Keep an eye out for these signs:
- Deep scratches in acrylic
- A failed DIY repair that is discoloured or lifting
- A hole punched through by something heavy
- Damage beneath the taps
Before you book anyone
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
- How long it needs to cure
- Aftercare advice
About our accreditations · Every repair comes with a one-year guarantee.
