Falkirk · Scotland
Bath Repair for Slamannan homes
Problem with your bath in Slamannan? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Bath repair in Slamannan without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s scratches you can feel with a fingernail and damage beneath the taps, we can normally put it right, whatever the material.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Area
- Slamannan (FK1)
- County
- Falkirk
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath repair in Slamannan
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Is the work guaranteed?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Is a holed acrylic bath repairable?
Generally. Send us a photo of the hole and one from under the bath if you can.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
When we would advise against a repair
A repair is not right for every job, including:
- Acrylic cracks with no access behind them
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price depends on:
- The material
- How many items we do on one visit
- What kind of damage it is
- Any earlier repairs that need removing first
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- A picture taken from further back
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Natural light rather than flash
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
How the visit works
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. It usually takes a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the next day.
Getting ready for the visit
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
How to get a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
When to call us in Slamannan
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
Keep an eye out for these signs:
- A cracked acrylic bath
- Impact holes in acrylic
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
What to look for in a quote
- What preparation is included
- What aftercare is recommended
- Whether the price covers travel
- What protection goes down before work starts
Should you replace it?
A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Slamannan. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- One visit for most repairs
- We’ll tell you if it’s not worth repairing
- One-year guarantee on every repair
- Free fixed quotes from pictures
See our prices page or resurfacing vs replacement cost guide.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Towns and villages near Slamannan
Also in Slamannan
Slamannan and nearby
Slamannan is about 5 miles south of Falkirk, in Falkirk. Customers in Slamannan get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. We work in 50 places in Falkirk, from the larger towns to small villages. You can also see our page for Glasgow, about 18 miles away.
Jobs in FK1 are booked in the same way as anywhere else. Streets in the area include Balcastle Road, St Laurence Crescent and Birniewell Road, and we cover them all. Other places close to Slamannan include Binniehill (1 mile south-east), Limerigg (1 mile south), Longriggend (3 miles south-west), Tamfourhill (4 miles north) and High Bonnybridge (4 miles north). Within a short drive, we also cover Falkirk (5 miles north), Grangemouth (7 miles north-east), Bo'ness (10 miles north-east), Larbert (6 miles north), Stenhousemuir (7 miles north) and Denny (6 miles north-west).
Local landmarks in Slamannan
Slamannan’s nearest station is Caldercruix station, roughly 3.8 miles south-west. A little further out are Falkirk Community Hospital (4.7 miles north). Open spaces near Slamannan include Black Loch.
About our accreditations · Every repair comes with a one-year guarantee.
