North Yorkshire · England
Bath chip & crack repair in Smelthouses, North Yorkshire
Bath repair in and around Smelthouses: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Rusty patches near the plughole
Do you need bath repair in Smelthouses?
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
If you can see any of these, send us a photo:
- An old repair that has yellowed or come loose
- Snagging damage from a refit
- Scuffs and scratches in the surface
- A chipped rim or side
What to look for in a quote
- What preparation is included
- How long it needs to cure
- Whether the price covers travel
- What protection goes down before work starts
Bath repair in Smelthouses without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in a single visit. Our repair technicians work on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding, and the jobs we see most are scuffs and scratches in the surface and rusty patches near the plughole.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Smelthouses (HG3)
- Area hub
- North Yorkshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
What affects the price in Smelthouses
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- The material and finish
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- Any details about the material
If you are in Smelthouses and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Repairing versus replacing in Smelthouses
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in a single visit. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why book with us
- One price list for the entire UK
- No need to remove anything
- Honest advice, even when it means no job
- Rooms protected and left tidy
Read our full price list or guide to resurfacing and replacement costs.
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a morning or an afternoon, tidy-up included.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
How to get a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Our work in Smelthouses
Smelthouses is about 8 miles south-west of Ripon, in North Yorkshire. Clients in Smelthouses get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We cover all 626 towns and villages across North Yorkshire. Our jobs stretch from Smelthouses to Leeds (about 19 miles away).
All of HG3 is covered, from the main roads to the quietest streets. Other places close to Smelthouses include Low Laithe (1 mile south), Wilsill (1 mile north-west), New York (1 mile south), Glasshouses (1 mile west) and Blazefield (1 mile north-west). We also work in nearby towns such as Harrogate (9 miles south-east), Knaresborough (11 miles south-east), Skipton (15 miles south-west), Ripon (8 miles north-east), Starbeck (10 miles south-east) and Bilton (8 miles south-east).
Landmarks near Smelthouses
In Smelthouses, that means homes near St Michael & All Angels and The Birch Tree pub, among other places. The countryside around Smelthouses includes Eavestone Lake.
Also near Smelthouses
What else we do in Smelthouses
Common questions in Smelthouses
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Are there extra charges for Smelthouses?
Travel is included in the price, and we charge the same wherever you are.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Can you quote from photos?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Keeping it looking good
So the finish stays in good condition:
- Get any new chip repaired before it rusts
- Give the bath a quick rinse after use
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
What we can’t put right
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we cannot get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
