Hampshire · England
Bath Repair for Soake homes
Problem with your bath in Soake? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- A kit repair that didn’t last
- Rusty patches near the plughole
How we handle bath repair in Soake
Most of our bath repairs take a few hours, and the bath is back in use the following day. You won’t need a plumber or tiler, because nothing is disconnected. Whether it’s scuffs and scratches in the surface and rust by the waste and overflow, we can usually put it right, on pressed steel enamel, roll-top & freestanding and cast iron enamel alike.
Every repair is covered by our one-year guarantee.
- Area
- Soake (PO7)
- Region
- Hampshire
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Soake
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. We charge the same wherever you are, so there is no premium for Soake. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Straight answers about what a repair can do
- Colour-matched on site
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
See our full price list and bath cost comparison.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
Where we work around Soake
Soake is about 1 mile north-west of Waterlooville, in Hampshire. Our technicians come to customers in Soake and the surrounding area, so you don’t need to take anything anywhere. We work in 683 places in Hampshire. You can also see our page for London, about 59 miles away.
Postcode districts we cover here: PO7. Local streets include Soake Road and Hambledon Road, all of which we cover. Neighbouring places we cover include Furzeley Corner (1 mile south-west), Hart Plain (1 mile east), Cowplain (1 mile east), Waterlooville (1 mile south-east) and Purbrook Heath (2 miles south). Larger places within reach include Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
Local landmarks in Soake
We visit homes around The Cowplain School, The Mead End and The Mead End pub, among other places. The nearest railway station is Bedhampton station, about 3.7 miles south-east. Nearby you’ll also find Clanfield Earthwork (4.7 miles north-east) and Queen Alexandra Hospital (3.2 miles south). Green spaces nearby include Southmoor Nature Reserve and Portsdown Hill.
Common problems we fix in Soake
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Typical reasons for a call-out include:
- A chipped rim or side
- Deep scratches in acrylic
- A kit repair that didn’t last
- Hairline or through cracks in acrylic
What your quote should include
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- When it can be used again
- How the room is protected while they work
Questions from Soake
What happens once I’ve sent pictures?
You’ll get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Do you work in Soake?
Yes. We cover the whole UK and travel to Soake and the rest of Hampshire. Send photos and we will quote, or call 0345 017 0787.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Is a holed acrylic bath repairable?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your photos and you will get one combined price.
How to look after the repair
Nothing complicated is needed:
- A dripping tap stains enamel, so fix it early
- Stick to mild cleaners and a soft cloth
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
What happens on the day
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to a few hours, depending on the damage, tidy-up included.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
Getting a price
For a price in Soake, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Nearby places to Soake
More services for Soake
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- The type of damage
- What the surface is made of
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Quotes from your pictures
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A clear, close picture of the problem area
- Natural light rather than flash
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- Cracks in parts of an acrylic bath we can’t get to from below
- Flexing caused by a failed cradle or loose feet
Send us photos and we will tell you honestly before you book.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
