Lancashire · England

Bath chip & crack repair in Sollom, Lancashire

Our technicians come to Sollom for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Sollom

How we handle bath repair in Sollom

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. If you’re dealing with snagging damage from a refit and a failed DIY repair that’s discoloured or lifting, we can normally put it right, on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel alike.

Big or small, it’s backed by a one-year guarantee in Sollom and across Lancashire.

Area
Sollom (PR4)
County
Lancashire
Cover
12 months on all our work
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Your questions about bath repair in Sollom

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders across Lancashire.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Is a cracked acrylic bath repairable?

In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

What areas do you cover?

We work UK-wide, and that includes Sollom. Prices do not change with location.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

When a repair is not the answer

Before booking, it’s worth knowing the limits too:

  • A bath that moves underfoot, until its support is fixed
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Metal that has corroded all the way through

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we repair

  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel

Different materials, different repairs

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.

Where we work around Sollom

Sollom is about 6 miles west of Leyland, in Lancashire. Across the PR4 area, we come to you. Sollom is one of 482 towns and villages in Lancashire where we work. We work right across the region, from Sollom to Liverpool (18 miles away).

Our technicians cover all of PR4. Streets in the area include Liverpool Road, Green Lane and Liverpool Old Road. Other places close to Sollom include Holmes (1 mile west), Tarleton (1 mile north), Holmeswood (2 miles south-west), Mere Side (2 miles south-west) and Rufford (2 miles south). Larger places within reach include Preston (9 miles north-east), Chorley (8 miles east), Lytham St Anne's (10 miles north-west), Bamber Bridge (8 miles north-east), Leyland (6 miles east) and Fulwood (10 miles north-east).

What’s near Sollom

In Sollom, that means homes near Tarleton Academy, St Mary's Church and Tarleton Holy Trinity CofE Primary School and the streets around them. Sollom’s nearest station is Croston station, about 2.1 miles east. Well-known places in the area include Greaves Hall (3.7 miles west). Not far away are Martin Mere and Mere Sands Wood.

Map of Sollom © OpenStreetMap contributors

Prices and what affects them

Prices start from £95. Each job gets its own fixed price. This is what makes a difference:

  • The colour and finish to match
  • How much damage there is
  • The material
  • Any earlier repairs that need removing first

We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what we need:

  • Something in shot to show the size
  • What it’s made of, if you know
  • A clear, close picture of the problem area
  • A picture taken from further back

If you’re in Sollom and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

The process

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes two to three hours for most chips, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the day after.

Getting ready for the visit

  • Ensure the area is dry
  • Mention any parking restrictions or tricky access
  • Let us know if it has been repaired before

Ask for a price

Most customers in Sollom get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a free quote

Advice

Should you replace it?

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • We come to you, anywhere in the UK
  • One-year guarantee on every repair
  • Nothing taken out or refitted
  • Same prices wherever you are

Read our prices page or resurfacing vs replacement cost guide.

Signs you need bath repair in Sollom

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.

Most people contact us when they notice one of these:

  • Chips under the taps
  • An old repair that has yellowed or come loose
  • Rusty patches near the plughole
  • Impact holes in acrylic

Questions to ask before booking

  • If travel is included in the price
  • How soon you can use it again
  • Whether they match the colour on site
  • What happens if the damage is worse than the pictures show

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.