Lancashire · England
Bath Repair for Mere Brow homes
Our technicians come to Mere Brow for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Holes from dropped items
- Chips along the edge of the bath
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Rinse the bath after use, especially in hard water areas
- Avoid scourers, wire wool and gritty cream cleaners
- Cover the bath during DIY or decorating
- Fix dripping taps early to stop staining and limescale
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Bath repair in Mere Brow, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Typical jobs include chips under the taps and rust by the waste and overflow, on cast iron enamel, pressed steel enamel and whirlpool & spa baths.
All our work comes with our one-year guarantee, wherever you are in Lancashire.
- Where
- Mere Brow (PR4)
- County
- Lancashire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Mere Brow
We work for landlords, letting agents and housing providers in Mere Brow as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Our work in Mere Brow
Mere Brow is about 5 miles east of Southport, in Lancashire. Across the PR4 area, we carry out the work at your property. Mere Brow is one of 482 places in Lancashire where we work. We work right across the region, from Mere Brow to Liverpool (18 miles away).
Jobs in PR4 are booked in the same way as anywhere else. You’ll find streets such as The Gravel, Cinder Lane and Pear Tree Close, and we cover them all. Neighbouring places we cover include Holmes (1 mile east), Mere Side (2 miles south-east), Holmeswood (2 miles south-east), Hundred End (2 miles north) and Sollom (2 miles east). Larger places within reach include Preston (11 miles north-east), Chorley (10 miles east), Lytham St Anne's (8 miles north-west), Bamber Bridge (10 miles north-east), Leyland (8 miles east) and Fulwood (11 miles north-east).
Local landmarks in Mere Brow
Locally, our jobs take us to homes close to Tarleton Mere Brow Church of England Primary School and Legh Arms and the streets around them. The closest station to Mere Brow is Bescar Lane station, roughly 3 miles south-west. A little further out are Greaves Hall (1.6 miles north-west). The countryside around Mere Brow includes Martin Mere and Mere Sands Wood.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why us?
- Same prices wherever you are
- One visit for most repairs
- Rooms protected and left tidy
- Every repair guaranteed for a year
See our pricing or resurfacing vs replacement cost guide.
FAQs for Mere Brow
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can I get a quote without a visit?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Cracks in acrylic we cannot reach from underneath
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Common problems we fix in Mere Brow
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Common reasons people in Mere Brow contact us are:
- A chipped rim or side
- Snagging damage from a refit
- Rust by the waste and overflow
- A kit repair that didn’t last
What your quote should include
- How to care for the finish
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- Whether cleaning and preparation are in the price
Prices and what affects them
Repairs from £95. Prices are worked out job by job. The main factors are:
- Where the damage is and how we get to it
- How much damage there is
- Unusual colours or finishes
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- The material, if you know it
- Something in shot to show the size
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours. If we find something your pictures didn’t show, we will explain it before carrying on.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the following day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Let us know about parking or access
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
Nearby places to Mere Brow
What else we do in Mere Brow
About our accreditations · Every repair comes with a one-year guarantee.
