Oxfordshire · England

Bath chip & crack repair in Somerton, Oxfordshire

Damaged bath in Somerton? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • A kit repair that didn’t last
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Somerton homes

Somerton and the surrounding area

Somerton is about 6 miles north-west of Bicester, in Oxfordshire. Whether you are in the middle of Somerton or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 443 towns and villages across Oxfordshire, from the larger towns to small villages. Our jobs stretch from Somerton to Birmingham (about 44 miles away).

We cover every part of the OX25 postcode area and the streets around it. Jobs here include addresses on Water Street, Wharf Lane and Ardley Road. We also travel to Fritwell (2 miles east), Clifton (2 miles north), Upper Heyford (2 miles south), Souldern (2 miles north-east) and Lower Heyford (3 miles south). Within a short drive, we also cover Oxford (14 miles south), Banbury (8 miles north), Bicester (6 miles south-east), Witney (15 miles south-west), Kidlington (9 miles south) and Headington Quarry (14 miles south).

Landmarks near Somerton

We visit homes around Church of St James, among other places. The nearest railway station is Heyford station, about 2.7 miles south. A little further out are Deddington Castle (2.4 miles north-west).

Map of Somerton © OpenStreetMap contributors

Bath repair in Somerton, done in place

Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on whirlpool & spa baths, cast iron enamel and pressed steel enamel, and common reasons people get in touch are impact holes in acrylic and an old repair that has yellowed or come loose.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.

Location
Somerton (OX25)
County
Oxfordshire
Warranty
One year on every repair
Quote
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Should you replace it?

People frequently assume a cracked or chipped bath has to come out. Usually it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job
  • Generally one visit, start to finish
  • A year’s guarantee on all work

Read our prices page and resurfacing vs replacement cost guide.

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Keeping it looking good

How the surface is treated afterwards matters. Here’s what we suggest:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Get any new chip repaired before it rusts
  • Put a towel in the bath if you are working above it
  • Fix dripping taps early to stop staining and limescale

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

Different materials, different repairs

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

What happens on the day

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We clean up when we are done and tell you when it’s ready to use.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the next day.

Before we arrive

  • Tell us if there are stairs or a lift
  • Mention any earlier repairs or resurfacing
  • Keep pets and children out of the room while we work

Getting a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Read more

Somerton questions

What do you need from me?

Some photos, your postcode and how to reach you. On the day, access to the room.

Can you redo someone else’s repair?

In most cases. The old repair comes out first.

Which areas do you work in?

Across the UK, and that includes Somerton. Prices don’t change with location.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Is a bath repair permanent?

Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Signs you need bath repair in Somerton

Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

The most common problems we’re called about are:

  • Damage beneath the taps
  • Chips on the rim or sides
  • Scratches you can feel with a fingernail
  • Hairline or through cracks in acrylic

What to look for in a quote

  • What aftercare is recommended
  • What protection goes down before work starts
  • How long the guarantee is and what it covers
  • Who turns up on the day

10 questions to ask before you book

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

How we price bath repair

Repairs from £95. There’s no charge for travel to Somerton. The price comes down to:

  • Unusual colours or finishes
  • Previous DIY repairs that have to come out
  • Access to the area
  • How much damage there is

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Quotes from your photos

The better the pictures, the more accurate the price. Here’s what helps:

  • Your postcode, so we can check dates
  • Details of any past repairs
  • A clear, close picture of the problem area
  • A coin beside the damage so we can judge size

If you’re in Somerton and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.