Oxfordshire · England
Bath Repair in Fewcott
Chip and crack repairs to enamel, acrylic and cast iron baths in Fewcott, carried out at your home and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Scratches you can feel with a fingernail
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Fixed prices from your pictures
- No extra charge for your area
- A year’s guarantee on all work
- Dust sheets down, tidy finish
See our prices page or bath cost comparison.
Bath repair in Fewcott without replacing anything
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We work on acrylic, pressed steel enamel and cast iron enamel, and common reasons people contact us are a kit repair that didn’t last and scratches you can feel with a fingernail.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Area
- Fewcott (OX27)
- Area hub
- Oxfordshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Prices start from £95. We price every job individually. What matters most is:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- How many areas need work
- The material
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- What it’s made of, if you know
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Where we work around Fewcott
Fewcott is about 4 miles north-west of Bicester, in Oxfordshire. We travel to homes and businesses in Fewcott and the surrounding area, so you do not need to take anything anywhere. Fewcott is one of 443 towns and villages in Oxfordshire where we work. Our jobs stretch from Fewcott to Birmingham (about 46 miles away).
We cover every part of OX27. That includes homes on Water Lane, Somerton Road and Ardley Road. Close by, we cover Ardley (1 mile south-east), Fritwell (1 mile north-west), Upper Heyford (2 miles south-west), Souldern (3 miles north-west) and Middleton Stoney (3 miles south). Larger places within reach include Oxford (13 miles south), Banbury (10 miles north-west), Bicester (4 miles south-east), Kidlington (9 miles south), Headington Quarry (13 miles south) and Bure Park (3 miles south-east).
What’s near Fewcott
Around Fewcott, we work in homes near Church of St Mary and White Lion pub and the streets around them. The closest station to Fewcott is Bicester North station, roughly 4 miles south-east of the centre. Further afield, we also cover the area around Bicester Community Hospital (4.2 miles south-east) and Ardley Castle (under half a mile south).
Towns and villages near Fewcott
More services for Fewcott
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Landlords, agents and businesses in Fewcott
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
FAQs for Fewcott
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so let us know about it.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Which areas do you work in?
We cover the whole UK, including Fewcott and the rest of Oxfordshire. Just include your postcode and we will offer you dates.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
How do I get a price for bath repair in Fewcott?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We clean up when we’re done and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
Ask for a price
Email us a photo of the damage and one of the whole item, with your OX27 postcode, and we will reply with a fixed quote.
Advice
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Make sure an acrylic bath is firm underfoot
- Store metal items away from the bath
- Fix dripping taps early to stop staining and limescale
- Clean with warm water and a mild detergent
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
When a repair isn’t the answer
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
