Oxfordshire · England
Bath Repair for Souldern homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Souldern and across Oxfordshire. Send pictures for a free, fixed quote.
- Repairs from £95
- Chips caused by builders
- Scuffs and scratches in the surface
How we handle bath repair in Souldern
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. We regularly repair acrylic, cast iron enamel and whirlpool & spa baths, and people most frequently call us about an old repair that has yellowed or come loose and scuffs and scratches in the surface.
Every repair is covered by a one-year guarantee.
- Where
- Souldern (OX27)
- County
- Oxfordshire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Souldern
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
How long before I can use the bath?
Usually within a day, depending on the repair.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Which areas do you work in?
Across the UK, so Souldern is covered. Prices don’t change with location.
Can you repair a hole in a bath?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Landlord and trade work in Souldern
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Souldern as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Prices and what affects them
Repairs from £95. We don’t charge extra for travel to Souldern. The price depends on:
- How hard the colour is to match
- Access to the area
- Doing more than one item at once
- Previous DIY repairs that have to come out
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- Where you are, by postcode
- A coin beside the damage so we can judge size
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
What a repair cannot fix
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Our work in Souldern
Souldern is about 6 miles south-west of Brackley, in Oxfordshire. Across the OX27 area, we carry out the work at your property. Souldern is one of 443 towns and villages in Oxfordshire where we work. Our nearest city page is Birmingham, about 44 miles away.
Jobs in OX27 are booked in the same way as anywhere else. Jobs here include addresses on High Street, Foxhill Lane and Fox Lane and the roads around them. We also cover the places around Souldern: Aynho (1 mile north), Fritwell (1 mile south), Clifton (2 miles west), Croughton (2 miles north-east) and Somerton (2 miles south-west). Within a short drive, we also cover Banbury (7 miles north-west), Bicester (6 miles south-east), Kidlington (11 miles south), Headington Quarry (15 miles south), Bure Park (6 miles south-east) and Chipping Norton (13 miles west).
Around Souldern
Typical jobs here are in homes near The Fox pub and Church of the Annunciation to the Blessed Virgin Mary and the streets around them. For rail, the closest station is Kings Sutton station, about 3.4 miles north-west of the centre. Other landmarks nearby include Brackley Community Hospital (5.5 miles north-east) and Ardley Castle (2.7 miles south-east).
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Make sure an acrylic bath is firm underfoot
- Clean with warm water and a mild detergent
- Don’t leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
Other services in Souldern
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Do you need bath repair in Souldern?
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Look out for any of the following:
- Rust by the waste and overflow
- Snagging damage from a refit
- Chips under the taps
- A cracked acrylic bath
Questions to ask before you book
- How soon you can use it again
- Whether the price covers travel
- Whether the colour is mixed to match
- A fixed price, and whether VAT is included
What we do, step by step
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. It normally takes a few hours, and we’ll tell you if anything changes.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Ensure the room can be ventilated
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
