Lincolnshire · England
Bath Repair for South Kyme homes
Bath repair in South Kyme without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- Chips under the taps
- Rust by the waste and overflow
Bath repair at your home in South Kyme
Most of our bath repairs take a few hours, and the bath is back in use the day after. You won’t need a plumber or tiler, because the bath doesn’t move. Whether it’s deep scratches in acrylic and chips under the taps, we can help, on cast iron enamel, roll-top & freestanding and pressed steel enamel alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- South Kyme (LN4)
- Area hub
- Lincolnshire
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Work done at your home or business
- CHAS and Constructionline accredited
- One price list for the entire UK
- Honest advice, even when it means no job
See our prices page or resurfacing vs replacement cost guide.
South Kyme and nearby
South Kyme is about 7 miles east of Sleaford, in Lincolnshire. Across the LN4 area, a technician comes to you. South Kyme is one of 732 towns and villages in Lincolnshire we cover. You can also see our page for Leeds, about 76 miles away.
Here we cover the LN4 postcode area. Local streets include High Street, Low Road and South Parade, all of which we cover. Close by, we cover North Kyme (2 miles north-west), Ewerby (4 miles west), Chapel Hill (4 miles north-east), Holland Fen (4 miles east) and Billinghay (4 miles north-west). Larger places within reach include Boston (10 miles south-east), Sleaford (7 miles west), Horncastle (13 miles north-east), Woodhall Spa (8 miles north), Witham (9 miles east) and Staniland (10 miles south-east).
Near you in South Kyme
Typical jobs here are in homes near Church of St Mary and All Saints and the streets around them. The nearest railway station is Heckington station, about 4.2 miles south-west.
Do you need bath repair in South Kyme?
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
It’s worth getting a quote if you see:
- Rusty patches near the plughole
- Chips along the edge of the bath
- A cracked acrylic bath
- Scuffs and scratches in the surface
Comparing quotes
- Whether the colour is mixed to match
- Whether the price covers travel
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Don’t scrub with anything abrasive
- Cover the bath during DIY or decorating
- Rinse the bath after use, especially in hard water areas
- Don’t leave a fresh chip for long
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
How it works
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, depending on the damage, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
How to get a price
Send us a picture of the damage and a wider shot of the entire item, with your LN4 postcode, and we will reply with a fixed quote.
Related advice
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Cracks in parts of an acrylic bath we cannot get to from below
- Rust that has eaten right through a steel bath
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
South Kyme questions
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
What happens after I send photos?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Lincolnshire.
Nearby places to South Kyme
Also in South Kyme
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
