Greater London · England
Bath chip & crack repair in South Street, Greater London
Bath repair in and around South Street: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- A failed DIY repair that’s discoloured or lifting
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our bath repair in South Street
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. If you are dealing with a chip where the taps sit and rust spots around the plughole, we can help, whatever the material.
You get a one-year guarantee, the same in South Street as everywhere else we work.
- Where
- South Street (TN16)
- Region
- Greater London
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow a few hours. Before leaving, we tell you when it can be used and how to care for it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the day after, the bath is ready to use.
How to prepare
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
Get a quote
If you are in South Street and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Cover the bath during DIY or decorating
- Store metal items away from the bath
- Give the bath a quick rinse after use
- Check that an acrylic bath does not move when you stand in it
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Common questions in South Street
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Common problems we fix in South Street
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we are called about are:
- A chipped rim or side
- Impact holes in acrylic
- Chips caused by builders
- Damage beneath the taps
Before booking anyone
- Whether the colour is mixed to match
- How soon you can use it again
- How to look after the finish
- If travel is included in the price
Covering South Street
South Street is about 4 miles north-east of Oxted, in Greater London. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Our repair technicians cover 764 places across Greater London, from the larger towns to small villages. You can also see our page for London, about 15 miles away.
Here we cover the TN16 postcode area. Close by, we cover Tatsfield (1 mile west), Force Green (2 miles south-east), Titsey (2 miles south-west), Westerham (2 miles south-east) and Moorhouse Bank (3 miles south). Further out, we also cover London (15 miles north-west), Stockwell (14 miles north-west), Orpington (6 miles north), Wimbledon (14 miles north-west), Kennington (15 miles north-west) and New Cross (13 miles north).
What’s near South Street
Locally, our jobs take us to homes close to Church of St Mary the Virgin and Charles Darwin School, among other places. South Street’s nearest station is Oxted station, roughly 3.7 miles south-west of the centre. Well-known places in the area include Tandridge Priory (3.2 miles south). The countryside around South Street includes West Kent Golf Course nature reserve and Betsom's Hill.
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly before you book.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Landlords, agents and businesses in South Street
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
For anyone letting property in or around South Street, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Towns and villages near South Street
Also in South Street
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in one visit. Our bath repair starts from £95. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Why us?
- Repair technicians who travel to you, UK-wide
- Rooms protected and left tidy
- Colour-matched on site
- Straight answers about what a repair can do
Take a look at our prices page or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
