Lancashire · England
Bath Repair in Spen Brook
Chip and crack repairs to enamel, acrylic and cast iron baths in Spen Brook, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- A kit repair that didn’t last
Keeping it looking good
So the finish stays in good condition:
- Check that an acrylic bath does not move when you stand in it
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
- Fix dripping taps early to stop staining and limescale
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
About our bath repair in Spen Brook
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s rust spots around the plughole and holes from dropped items, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Spen Brook (BB12)
- County
- Lancashire
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Spen Brook
Spen Brook is about 2 miles west of Nelson, in Lancashire. From the centre of Spen Brook to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Spen Brook is one of 482 places in Lancashire we cover. You can also see our page for Manchester, about 26 miles away.
Jobs in BB12 work the same way as everywhere else we cover. We regularly work on streets such as Spenbrook Road, Gorrell Close and Osborne Terrace. Close by, we cover Newchurch in Pendle (1 mile north-west), Wheatley Lane (1 mile south-east), Thorney Holme (1 mile north-east), Fence (1 mile south) and Barley (1 mile north). Larger places within reach include Burnley (4 miles south), Accrington (8 miles south-west), Rawtenstall (10 miles south), Colne (4 miles east), Clitheroe (5 miles west) and Haslingden (10 miles south).
Local landmarks in Spen Brook
In Spen Brook, that means homes near St Mary's Church, Wheatley Lane Methodist Voluntary Aided Primary School and Marsden Heights Community College. The closest station to Spen Brook is Brierfield station, about 2 miles south-east of the centre. Well-known places in the area include Pendle Community Hospital (2.3 miles east) and British In India Museum (2.8 miles east). For a walk, there is Rowley Lake and Salthill Quarry.
Nearby places to Spen Brook
More services for Spen Brook
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in one visit. Prices start from £95. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Most jobs done in one visit
- We will tell you if it’s not worth repairing
- We leave the room as we found it
- No need to remove anything
See our prices page or resurfacing vs replacement cost guide.
Your questions about bath repair in Spen Brook
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Something went through my bath. Can it be fixed?
Normally. Send us a photo of the hole and one from under the bath if you can.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
Do you need bath repair in Spen Brook?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
It’s worth getting a quote if you see:
- Chips caused by builders
- Chips under the taps
- Impact holes in acrylic
- Scratches you can feel with a fingernail
Questions to ask before you book
- How long it needs to cure
- Who turns up on the day
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
The process
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It generally takes a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Advice
Prices and what affects them
Repairs from £95. You will know the full cost before you book. We take into account:
- Whether we combine several jobs
- Where the damage is and how we get to it
- What kind of damage it is
- The colour and finish to match
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed quote
You can generally get a fixed quote without us visiting. To make it quick:
- Whether it’s been repaired or coated before
- The material, if you know it
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
When we would advise against a repair
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Metal that has corroded all the way through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we’ll tell you honestly.
Materials we work on in Spen Brook
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Landlord and trade work in Spen Brook
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
