South Lanarkshire · Scotland
Bath chip & crack repair in Spittal, South Lanarkshire
Bath repair for Spittal, without a refit. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- Scuffs and scratches in the surface
- Damage beneath the taps
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Cracks in acrylic we cannot reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we will say what we think.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Bath repair at your home in Spittal
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the day after. Our repair technicians work on acrylic, cast iron enamel and roll-top & freestanding, and the jobs we see most are a failed DIY repair that’s discoloured or lifting and rust by the waste and overflow.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Where
- Spittal (G73, G45)
- County
- South Lanarkshire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
After the repair has cured, a few habits help it last:
- Don’t scrub with anything abrasive
- If an acrylic bath flexes, have its feet adjusted
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse it down after each bath
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
How it works
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a morning or an afternoon, and we’ll keep you posted as we go.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
- Make sure the room can be ventilated
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Read more
Do you need bath repair in Spittal?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
It’s worth getting a quote if you see:
- Chips on the rim or sides
- A chip where the taps sit
- Scuffs and scratches in the surface
- Impact holes in acrylic
Questions to ask before booking
- How to care for the finish
- A fixed quote, and whether VAT is included
- What prep work is covered
- If travel is included in the price
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Prices and what affects them
Repairs from £95. We give every job a fixed quote from pictures. This is what makes a difference:
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- What the surface is made of
- The colour and finish to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
You can take the photos on your phone. Ensure they show:
- A close-up of the damage, in focus
- One picture of the entire bath
- Where you are, by postcode
- Something in shot to show the size
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Questions from Spittal
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
How long before I can use the bath?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Spittal.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Do you come to Spittal?
Yes. We cover the whole UK and travel to Spittal and the rest of South Lanarkshire. Send us photos for a fixed quote, or call 0345 017 0787.
Repairing versus replacing in Spittal
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Everything repaired in place
- CHAS and Constructionline accredited
- Most jobs done in one visit
- No extra charge for your area
Read our prices page or guide to resurfacing and replacement costs.
Where we work around Spittal
Spittal is about 3 miles west of Cambuslang, in South Lanarkshire. Our technicians come to customers in Spittal, so nothing has to leave your home. We cover 139 places in South Lanarkshire, from the larger towns to small villages.
We cover every part of the G73 and G45 postcode area. That includes homes on Lochlea Road, Alloway Crescent and Carrick Drive. We also cover the places around Spittal: Polmadie (1 mile west), Croftfoot (1 mile west), Rutherglen (1 mile north-east), King's Park (1 mile west) and Fernhill (1 mile south-east). Further out, we also cover East Kilbride (4 miles south), Hamilton (7 miles south-east), Cambuslang (3 miles east), Uddingston (6 miles east), Blantyre (5 miles east) and Larkhall (11 miles south-east).
Around Spittal
Typical jobs here are in homes near An Ruadh-Ghleann pub, Stonelaw Parish Church and Stonelaw High School and the streets around them. Also close by are Cathkin Park (1.5 miles north-west) and Couper Institute and Library (1.6 miles west). There is a railway station in Spittal itself: Croftfoot station. Other landmarks nearby include New Victoria Hospital (1.8 miles north-west) and The Forge Shopping Centre (2.7 miles north). The countryside around Spittal includes Hogganfield Loch and Cathkin Braes.
Also near Spittal
Other services in Spittal
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
