Northamptonshire · England
Bath Repair in Spratton
Bath repair in and around Spratton: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips caused by builders
- Chips on the rim or sides
How we handle bath repair in Spratton
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Whether it’s an old repair that has yellowed or come loose and a cracked acrylic bath, we can normally put it right.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Spratton (NN6)
- Area hub
- Northamptonshire
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
Some jobs aren’t right for a repair, for example:
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Also near Spratton
Also in Spratton
Repair or replace: which is better?
People frequently assume a cracked or chipped bath has to come out. Typically it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Colour mixed on the day to match
- No extra charge for your area
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
Read our pricing and guide to resurfacing and replacement costs.
FAQs for Spratton
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Spratton.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Prices and what affects them
Repairs from £95. We give every job a fixed price from photos. This is what makes a difference:
- Doing more than one item at once
- Where the damage is and how we get to it
- How hard the colour is to match
- What kind of damage it is
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
You can take the photos on your phone. Ensure they show:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- A close-up of the damage, in focus
If you are in Spratton and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Spratton and the surrounding area
Spratton is about 6 miles north-west of Northampton, in Northamptonshire. Jobs in Spratton are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our technicians cover 364 places across Northamptonshire. Our jobs stretch from Spratton to Birmingham (about 41 miles away).
Every address in NN6 is covered, from the main roads to the quietest streets. Streets in the area include Church Road, High Street and St Lukes Close. Other places close to Spratton include Little Creaton (1 mile north), Creaton (1 mile north-west), Holdenby (2 miles south-west), Brixworth (2 miles east) and Hollowell (2 miles north-west). Within a short drive, we also cover Northampton (6 miles south-east), Corby (15 miles north-east), Kettering (11 miles north-east), Wellingborough (11 miles east), Daventry (10 miles south-west) and Rushden (15 miles east).
What’s near Spratton
Our customers here include homes close to Spratton Church of Engand Primary School and Church of St Andrew, among other places. Not far away are Harlestone Heath.
Looking after it afterwards
To keep it looking its best:
- Keep abrasive pads and gritty cleaners away from the bath
- Check that an acrylic bath does not move when you stand in it
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
