Northamptonshire · England
Bath Repair for Creaton homes
Bath repair for Creaton, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- A chip where the taps sit
- Scuffs and scratches in the surface
When a repair is not the answer
Before booking, it’s worth knowing the limits too:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Cracks in acrylic we can’t reach from underneath
Send us photos and we will tell you honestly before booking.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Bath repair in Creaton without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. We regularly repair acrylic, cast iron enamel and pressed steel enamel, and common reasons people get in touch are an old repair that has yellowed or come loose and scratches you can feel with a fingernail.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Creaton (NN6)
- Region
- Northamptonshire
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on the damage, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the next day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Let us know about parking or access
- Let us know which floor the room is on
How to get a price
If you’re in Creaton and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
How we price bath repair
Repairs from £95. We charge the same across the UK, including Creaton. The price reflects:
- How much damage there is
- What kind of damage it is
- Unusual colours or finishes
- Any earlier repairs that need removing first
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Quotes from your photos
We price nearly every job from photos. This is what we need:
- What it’s made of, if you know
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
- Something in shot to show the size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Prices start from £95. Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Every repair guaranteed for a year
- Honest advice, even when it means no job
- One price list for the entire UK
- Colours mixed by hand to suit your surface
Take a look at our full price list or resurfacing vs replacement cost guide.
Covering Creaton
Creaton is about 7 miles north-west of Northampton, in Northamptonshire. Across the NN6 area, we carry out the work at your property. Creaton is one of 364 towns and villages in Northamptonshire we cover. You can also see our page for Birmingham, about 40 miles away.
Jobs in NN6 work the same way as everywhere else we cover. Whether you live on High Street, The Jetty and Court House Close or a nearby road, a technician can come to you. We also travel to Little Creaton (1 mile south-east), Cottesbrooke (1 mile north), Hollowell (1 mile west), Spratton (1 mile south-east) and Holdenby (3 miles south). Further out, we also cover Northampton (7 miles south-east), Corby (15 miles north-east), Kettering (11 miles east), Wellingborough (11 miles east), Daventry (10 miles south-west) and Market Harborough (10 miles north).
Near you in Creaton
Around Creaton, we work in homes near Spratton Church of Engand Primary School and Church of St Michael, among other places. For a walk, there is Pitsford Water.
Landlords, agents and businesses in Creaton
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Towns and villages near Creaton
What else we do in Creaton
Looking after it afterwards
Once the work has cured, treat it gently:
- Fix dripping taps early to stop staining and limescale
- If an acrylic bath flexes, have its feet adjusted
- Rinse it down after each bath
- Have new chips seen to early
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
When to call us in Creaton
A cracked acrylic bath generally wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
Look out for any of the following:
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
- Chips along the edge of the bath
- Damage beneath the taps
Questions to ask before you book
- What aftercare is recommended
- What happens if the damage is worse than the photos show
- Who turns up on the day
- Whether the price covers travel
Creaton questions
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Which areas do you work in?
All of Northamptonshire, and the rest of the UK. Travel is included in the price.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do you cover Creaton?
Yes. We cover the entire UK and travel to Creaton. Send pictures and we’ll quote, or call 0345 017 0787.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
About our accreditations · Every repair comes with a one-year guarantee.
