Northamptonshire · England
Bath Repair in Brixworth
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Brixworth. Free, fixed quotes from your pictures.
- Repairs from £95
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
Bath repair in Brixworth, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in a single visit. We regularly repair acrylic, roll-top & freestanding and pressed steel enamel, and people most frequently call us about rust by the waste and overflow and a kit repair that didn’t last.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Brixworth (NN6)
- Region
- Northamptonshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Nearby places to Brixworth
Also in Brixworth
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Brixworth questions
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can a cracked acrylic bath be fixed?
Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do you cover the entire of Northamptonshire?
Everywhere in the UK, Brixworth included. There is no extra charge for travel.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a few hours, depending on the damage, tidy-up included.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Let us know if it has been repaired before
- Clear the area around the damage
- Mention any parking restrictions or tricky access
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Related advice
Landlords, agents and businesses in Brixworth
For anyone letting property in or around Brixworth, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Brixworth and the surrounding area
Brixworth is about 5 miles north of Northampton, in Northamptonshire. Clients in Brixworth get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Brixworth is one of 364 places in Northamptonshire we cover. Our nearest city page is Birmingham, about 43 miles away.
Every address in NN6 is covered. From High Street, Station Road and Stannard Way or a nearby road, a technician can come to you. If you are just outside Brixworth, we cover Spratton (2 miles west), Little Creaton (2 miles west), Creaton (3 miles west), Cottesbrooke (3 miles north-west) and Holdenby (4 miles south-west). Within a short drive, we also cover Northampton (5 miles south), Corby (14 miles north-east), Kettering (9 miles north-east), Wellingborough (9 miles east), Daventry (12 miles west) and Rushden (13 miles east).
Near you in Brixworth
In Brixworth, that means homes near The George Inn, All Saints' Church and Brixworth CofE VC Primary School. Nearby you’ll also find Draughton (4.7 miles north-east). For a walk, there’s Pitsford Water.
Looking after it afterwards
Nothing complicated is needed:
- Fix dripping taps early to stop staining and limescale
- Stick to mild cleaners and a soft cloth
- Get any new chip repaired before it rusts
- If an acrylic bath flexes, have its feet adjusted
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Signs you need bath repair in Brixworth
A cracked acrylic bath usually wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
Typical reasons for a call-out include:
- Chips under the taps
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
- Rust spots around the plughole
What to look for in a quote
- What happens if they find more damage
- What preparation is included
- How your room will be protected
- What the guarantee covers, and for how long
Honest limits
Some jobs are not right for a repair, including:
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
- Wear across the entire surface, which needs re-enamelling
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Brixworth
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
How we price bath repair
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- How much damage there is
- The material and finish
- The type of damage
- Whether we combine several jobs
The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
Quotes from your photos
Two or three clear photos are generally enough. Try to include:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
- What it’s made of, if you know
Most clients in Brixworth get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
