Hampshire · England
Bath chip & crack repair in Springvale, Hampshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Springvale, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
Bath repair in Springvale without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on pressed steel enamel, whirlpool & spa baths and cast iron enamel, and common reasons people contact us are chips along the edge of the bath and a chip where the taps sit.
You get a one-year guarantee, the same in Springvale as everywhere else we work.
- Where
- Springvale (SO23)
- Region
- Hampshire
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath repair in Springvale?
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
These are the problems we’re asked about most:
- Scuffs and scratches in the surface
- Chips along the edge of the bath
- A failed DIY repair that is discoloured or lifting
- Snagging damage from a refit
Before you book anyone
- If travel is included in the price
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- When it can be used again
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
What we can’t put right
A few problems are outside what a surface repair can do:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Springvale
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Nearby places to Springvale
What else we do in Springvale
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take two to three hours for most chips, tidy-up included.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
How we price bath repair
Prices start from £95. We give every job a fixed price from pictures. This is what makes a difference:
- How hard the colour is to match
- The type of damage
- Access to the area
- How much damage there is
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- Whether it’s been repaired or coated before
- Any details about the material
- One sharp close-up of the damage
- A photo taken from further back
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Springvale and the surrounding area
Springvale is about 3 miles north of Winchester, in Hampshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. We work right across the region, from Springvale to London (59 miles away).
Jobs in SO23 work the same way as everywhere else we cover. Local streets include Boyne Rise, Springvale Road and Forbes Road, and we cover them all. Neighbouring places we cover include Worthy Down (2 miles north-west), South Wonston (2 miles north-west), Stoke Charity (3 miles north), Hunton (4 miles north) and Sutton Scotney (4 miles north-west). Larger places within reach include Basingstoke (14 miles north-east), Winchester (3 miles south), Eastleigh (9 miles south), Andover (11 miles north-west), Totton (15 miles south-west) and Chandler's Ford (9 miles south-west).
Landmarks near Springvale
Typical jobs here are in homes near St Mary's Church Hall, The Cart And Horses Public House and Kings Worthy Primary School, among other places. The closest station to Springvale is Winchester station, roughly 2.4 miles south. A little further out are Royal Observer Corps Museum (1.7 miles south) and St John's Rooms And Chapel (2.7 miles south). Green spaces nearby include Twyford Down and Winnall Moors.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Fix dripping taps early to stop staining and limescale
- Get any new chip repaired before it rusts
- Rinse the bath after use, especially in hard water areas
- Put a towel in the bath if you are working above it
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Common questions in Springvale
Which areas do you work in?
We work UK-wide. Our prices are the same everywhere.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Will I be able to see the repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you fix rust around the plughole?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
